Advertisement
NATURE SOUND/PRESET
Projector lens
Projector unit
Display
FM wire antenna
AC power cord
Use the tactile dots on VOL/SET + and TUNING + and the tactile characters on 3
(NATURE SOUND/PRESET) and ALARM RESET/OFF as a guide when operating the
unit.
Operations
Listening to the radio
1
Press AM/FM/NATURE SOUND
Setting the clock
repeatedly to select the desired band
(AM or FM).
manually
2
Press TUNING + or – to tune to the
To change the clock setting manually, operate
desired station.
the unit as follows.
If you press and hold TUNING + or –,
scanning starts. Scanning pauses when a
1
Press and hold SET TIME/DATE for
station is found, and restarts after a few
more than 2 seconds.
seconds. To stop scanning, press TUNING +
The year will start to flash on the display.
or – (or SNOOZE/BRIGHTNESS/ENTER).
2
3
Press VOL/SET + or – repeatedly to
Press VOL/SET + or – to adjust the
select the year, and then press
volume.
SNOOZE/BRIGHTNESS/ENTER.
To turn off the radio, press ALARM RESET/
OFF.
3
Repeat step 2 to set the month, day
and time.
To preset radio stations
After setting the time, a beep will sound.
You can preset 5 stations for FM and 5 stations
Notes
for AM.
If you do not press any button for about 1
1
Tune to the station you wish to preset.
minute while setting the clock, clock setting
mode will be canceled.
2
Press and hold the desired NATURE
A 100-year calendar (2013 - 2112) is installed
SOUND/PRESET (1 to 5) until you hear
in the system.
a beep.
To change the time format
You can choose between the 12-hour system
(default) or the 24-hour system to display the
Example: The following display appears
time.
when you preset FM 105.7 MHz to preset
Press and hold ALARM RESET/OFF and
number 3 for FM.
SNOOZE/BRIGHTNESS/ENTER for about
3 seconds.
The time format toggles between the 12-hour
system ("AM 12:00" = midnight) and the
24-hour system ("0:00" = midnight).
To display the date and year
Press SET TIME/DATE once to display the
month and day, and press again to display the
year. To return to the current time display, press
SET TIME/DATE once again; or after a few
seconds the clock display will return
automatically.
When daylight saving time
(summer time) begins/ends
while Automatic DST/summer
time adjustment is set to off
The display shows the frequency for a few
seconds and then changes back to the
Change the clock setting manually if you have
current time.
canceled the Automatic DST/summer time
To change the preset station, tune to the
adjustment.
desired station and press and hold the
NATURE SOUND/PRESET (1 to 5) until you
hear a beep.
Using the projector
Note
If you try to store another station with the
The projector function allows you to display the
clock and the currently used alarm icons on a
same preset number, the previously stored
nearby wall or ceiling at a range of 0.5 m – 4 m
station will be replaced.
(1 5/8 feet – 13 1/8 feet).
To tune to a preset station
1
Press AM/FM/NATURE SOUND
repeatedly to select the desired band
(AM or FM).
2
Press NATURE SOUND/PRESET (1 to 5)
where the desired station is stored.
3
Press VOL/SET + or – to adjust the
volume.
Note
If no station has been preset yet, "Non"
1
Rotate the projector unit to point the
appears on the display. Then the unit returns
projector lens in the desired direction.
to the same state as in step 1.
2
Press PROJECTION.
3
Turn FOCUS to adjust the focus.
To turn off the projector, press PROJECTION
again.
To rotate the projection view
Press ROTATE PROJECTION repeatedly.
Each time you press ROTATE PROJECTION, the
projection view rotates as Fig. .
Notes
Do not stare into the lens directly.
The projector function cannot be used unless
the clock has been set.
Certain walls and ceilings may not display
the projection properly.
The projector unit can be rotated 90° forward
or backward from the upward position, and
clicks when returned to the upward position.
If the projector unit is rotated beyond its
limits, it may be damaged.
The projector will automatically turn off after
16 hours.
5
Press VOL/SET + or – to select the
Selecting a Nature
desired alarm mode ("RADIO," "BUZZ,"
Sound
or "NATURE"), and press SNOOZE/
BRIGHTNESS/ENTER.
This unit includes 5 types of Nature Sounds:
Sea Waves, Birds, Rain, Brook, and Under the
Sea.
1
Press AM/FM/NATURE SOUND
repeatedly to select the Nature Sound.
2
Press the desired NATURE SOUND/
PRESET (1 to 5).
When selecting "RADIO"
Proceed to " Setting the radio alarm."
When selecting "BUZZ"
The setting is complete. The buzzer will
Icons
Sound type
sound at the set time, gradually increasing
in volume. ("A" (or "B") flashes on the
Sea Waves
display.)
Birds
When selecting "NATURE"
Proceed to " Setting the Nature Sound
Rain
alarm."
Brook
Setting the radio alarm
Under the Sea
6
Press VOL/SET + or – to select the AM
To turn off the Nature Sound, press ALARM
band or FM band, and press SNOOZE/
RESET/OFF.
BRIGHTNESS/ENTER.
Note
When other functions are in use, Nature
Sounds are not available.
Setting the alarm
The dual alarm function allows you to set two
alarm programs (ALARM A and ALARM B).
7
Press VOL/SET + or – (or NATURE
The alarm time can be set for each program
SOUND/PRESET (1 to 5)) to select the
and the alarm sound can be selected from
"RADIO" (radio), "BUZZ" (buzzer), or "NATURE"
preset number of desired station, and
(Nature Sound).
press SNOOZE/BRIGHTNESS/ENTER.
Before setting the alarm
Make sure to set the clock. (See "Setting the
clock manually.")
To set the radio alarm, first preset your
favorite station. (See "To preset radio
stations.")
1
Press and hold SET ALARM/ALARM A
(or B) for more than 2 seconds.
If no station has been preset yet
The preset number and "Non" appear on
While setting the alarm, "A" (or "B") flashes
on the display.
the display alternately. In this case, the
buzzer will sound at the set time.
2
Press VOL/SET + or – to select the
8
Press VOL/SET + or – to adjust the
desired hour, and press SNOOZE/
volume, and press SNOOZE/
BRIGHTNESS/ENTER.
BRIGHTNESS/ENTER.
3
Press VOL/SET + or – to select the
The setting is complete. The radio will turn
desired minute, and press SNOOZE/
on at the set time, gradually increasing in
BRIGHTNESS/ENTER.
volume. ("A" (or "B") flashes on the display.)
4
Press VOL/SET + or – to select the
Setting the Nature Sound alarm
desired alarm period ("WEEKDAY,"
6
"WEEKEND," or every day*), and press
Press VOL/SET + or – (or NATURE
SNOOZE/BRIGHTNESS/ENTER.
SOUND/PRESET (1 to 5)) to select the
* In the case of every day, both
desired Nature Sound, and press
"WEEKDAY" and "WEEKEND" are
SNOOZE/BRIGHTNESS/ENTER.
displayed.
7
Press VOL/SET + or – to adjust the
volume, and press SNOOZE/
BRIGHTNESS/ENTER.
The setting is complete. The Nature Sound
will sound at the set time, gradually
increasing in volume. ("A" (or "B") flashes on
the display.)
To stop the alarm
Setting the sleep
Press ALARM RESET/OFF to turn off the
timer
alarm.
The alarm will sound again at the same time
You can fall asleep to the radio or Nature
the next weekday or the next weekend.
Sound using the sleep timer, which turns off
the radio or Nature Sound automatically after a
To doze for a few more minutes
preset duration.
Press SLEEP while the radio or Nature
Press SNOOZE/BRIGHTNESS/ENTER.
Sound is playing.
The sound turns off, but will automatically
come on again after about 10 minutes.
"SLEEP" appears on the display.
Each time you press SNOOZE/BRIGHTNESS/
Each time you press SLEEP, the duration (in
ENTER, the snooze time changes as follows:
minutes) changes on the display as follows:
The display shows the snooze time for a few
seconds and returns to show the current time.
The radio or Nature Sound will play for the
("A" (or "B") flashes on the display.)
duration you set, then shut off.
To deactivate the sleep timer, press SLEEP
To deactivate the alarm
repeatedly to set the sleep timer to "OFF."
Press SET ALARM/ALARM A (or B).
To turn off the radio or Nature
"A" (or "B") disappears from the display.
Sound before the preset time
To change an alarm setting
Press ALARM RESET/OFF.
Set the alarm again.
Tips
To use both the sleep timer and
When the alarm setting is complete, the
alarm
alarm time setting is displayed.
You can fall asleep to the radio or Nature
If you press and hold SNOOZE/BRIGHTNESS/
Sound and also be awakened by the alarm at
ENTER for more than 2 seconds while setting
the preset time.
the alarm, the alarm setting is immediately
complete.
Set the alarm, then set the sleep timer.
Notes
Tip
If a second alarm sounds during a first (or
When you press SLEEP while the sleep timer
the snooze function is active), the second
is activated, the remaining time appears on
alarm takes priority.
the display.
If the same alarm time is set for both ALARM
Note
A and ALARM B, ALARM A takes priority.
If no operation is performed while the alarm
When the alarm is set to sound during the
is sounding, the alarm will stop after about
sleep timer duration, the sleep timer will be
60 minutes.
deactivated automatically when the alarm
When Automatic DST/summer time
sounds.
adjustment is set, the alarm sounds as
follows:
Setting the brightness
– If the alarm is set to a time that is
skipped as a result of daylight saving
of the display
time starting, the alarm will sound when
daylight saving time is applied.
– If the alarm is set to a time that is
Three levels of brightness are available.
doubled as a result of daylight saving
Press SNOOZE/BRIGHTNESS/ENTER.
time ending, the alarm will sound twice.
Each time you press SNOOZE/BRIGHTNESS/
Notes on the alarm in the event of a
ENTER, the brightness of the display changes
power interruption
as follows:
In the event of a power interruption, the alarm
functions work until the battery is fully
discharged. But certain functions may be
affected as follows:
The display will disappear.
Tip
If the alarm sound is set to "RADIO" or
You can also set the brightness of the display
"NATURE," the buzzer will sound.
to off by pressing and holding SNOOZE/
If a power interruption occurs while the
alarm is sounding, the buzzer will sound.
BRIGHTNESS/ENTER.
If ALARM RESET/OFF is not pressed, the
Notes
alarm will sound for about 5 minutes.
When the alarm is sounding or the snooze
If " " appears on the display, the alarm will
function is active, the brightness of the
not sound in the event of a power
display cannot be changed.
interruption. Replace the battery if " "
Even if the brightness is set to off, the display
appears.
lights at a low brightness level when the
The snooze function will not work.
alarm sounds.
During a power interruption, the alarm will
sound only once at the set time.
Charging a
smartphone
You can charge a smartphone by connecting it
to the unit using a USB cable (not supplied).
USB cable supplied
with the smartphone
Notes
There is no guarantee that this unit can be
used to charge all products that can be
charged via USB.
This unit does not support power feeds
greater than 5 V/1.5 A.
Check the charge status on the smartphone.
If a warning tone sounds, remove the
smartphone from the unit.
The reception sensitivity on the radio may
worsen when charging a smartphone via
USB.
Smartphone
Advertisement
