Advertisement
Listening to Sound from an
Other Playback Operations
Optional Component
To change angles (only for DVD
You can listen to sound from a
VIDEOs)
component connected to the AUDIO IN
jack on the unit using a 3.5 mm stereo
Press ANGLE/TUNER MENU during
audio cord (not supplied).
playback to select the desired angle.
1
Connect the audio output jacks of
To display subtitles (only for DVD
your component and the AUDIO
VIDEOs and Xvid video files)
IN jack of this system using the
audio cord.
Press SUBTITLE repeatedly during
playback to select the desired
subtitle language.
To change the sound
Press AUDIO/SLEEP repeatedly
during playback to select the desired
audio signal format.
When playing a DVD VIDEO with
multiple audio formats, you can
change the audio format from PCM,
Dolby Digital, etc. If the DVD VIDEO is
2
Press VOLUME ˋ to turn down
recorded with multilingual tracks, you
the volume.
can also change the audio language.
3
Press FUNCTION repeatedly to
select the AUDIO IN function.
4
Start playback of the connected
component and press VOLUME
+/ˋ to adjust the volume.
17
Ą After you have finished
To select an equalizer setting
Adjust the microphone volume to
Press EQ repeatedly during
"MIC 0" and disconnect the
microphone from the MIC jack .
playback until the desired mode
appears on the display.
Ą To adjust the microphone echo level
The default setting is underlined.
1
Press ECHO while singing.
"FLAT": Flat and pure sound mode.
"ROCK": Enhanced low and high
2
Press / to adjust the echo
range for great sounding movie
effect.
effects and atmosphere. Great for
action movies and rock music.
Note
"POP": Ideal for listening to pop
The microphone function is only
music.
available when using the DVD/CD and
"JAZZ": Clear mid and high range.
USB functions.
Recreates the atmosphere of a live
club with the artist just in front of
Listening to the Radio
you. Good for jazz music and
watching dramas.
To preset radio stations
"CLASSIC": Ideal for listening to
classical music and watching live
1
Press FUNCTION repeatedly to
concert DVDs.
select "FM."
2
Press and hold TUNING +/ˋ for
Singing Along: Karaoke
2 seconds until the frequency
You can sing along with the music by
begins to change on the display.
The system automatically scans the
connecting microphone (not supplied).
radio frequencies and stops when it
1
Connect an optional microphone
finds a clear station.
to the MIC jack on the unit.
If scanning does not stop, press Ą
"MIC ON" appears on the display.
to stop scanning, then perform
2
Press MIC LEVEL .
manual tuning to tune to a desired
3
Press / to adjust the
station. You can perform manual
tuning by pressing TUNING +/ˋ
microphone volume.
repeatedly.
4
Start playing the music and adjust
the volume.
When you tune to a station that
provides RDS services, the station
name appears on the display
(European models only).
21
[4:3LB]: Displays a wide picture with
[SCREEN] settings
black bands on the top and bottom.
Ą [TV System]*
[PAL]: For a PAL-system TV.
[NTSC]: For an NTSC-system TV.
[Auto]: For a TV that is compatible with
both PAL and NTSC.
* The default setting varies depending
on the country or region.
[LANGUAGE] settings
Ą [Screen Saver]
[ON]: Turns on the screen saver when
Ą [OSD] (On-Screen Display)
in stop, pause, no disc, or eject mode
You can select the display language on
for more than 15 minutes.
the TV screen.
[OFF]: Turns off the screen saver.
Ą [Audio]
Ą [TV Type]
You can select the preferred audio
[16:9]: Select this when connecting a
language for DVDs with multiple sound
wide-screen TV or a TV with a wide
tracks.
mode function.
Ą [Subtitle]
You can select the language of the
subtitles recorded on a DVD VIDEO.
Ą [Menu]
You can select the language for a disc's
menu.
[4:3PS]: Displays a full-height picture
[AUDIO] settings
on the entire screen, with trimmed
Ą [DRC]
sides.
Adjusts the level of dynamic range for
audio output.
Ą [Karaoke Setup]
[ECHO]: Adjusts the echo level.
[MIC VOL]: Adjusts the microphone
volume level.
25
Color irregularity occurs on the TV
There is no microphone sound.
Press VOLUME + repeatedly to
screen.
The system's speakers contain
adjust the speaker volume.
Press MIC LEVEL , then press
magnetic parts, so magnetic distortion
may occur. When color irregularity
to adjust the microphone volume.
occurs on the TV screen, check the
Make sure the microphone is
connected to MIC jack correctly.
following items.
ˋ Install the speakers at least 0.3
Make sure the microphone is turned
meters away from your TV set.
on.
ˋ If the color irregularity persists, turn
Operation
off the TV set once, then turn it on
after 15 to 30 minutes.
There is severe hum or noise, or
ˋ Reposition the speakers farther away
stations cannot be received when
from your TV set.
tuning to the FM station.
The [TV System] setting does not
Connect the antenna properly.
match your TV.
Try another location and orientation
Reset the setting (see "[Default]" under
for better antenna reception.
"[PREFERENCE] settings").
Keep the antenna away from the
speaker cords and the power cord to
Sound
avoid picking up noise.
Turn off nearby electrical equipment.
There is no sound.
Press VOLUME + repeatedly to
A disc does not play.
adjust the volume.
The region code on the DVD does not
Check the speaker connections.
match the system.
The system is in pause status or in
Moisture has condensed inside the
slow-motion play mode. Press
unit and may cause damage to the
to return to normal playback.
lenses. Remove the disc and leave
the unit turned on for about half an
There is severe hum or noise.
hour.
Move the system away from the
source of noise.
A DATA CD or DATA DVD cannot be
Connect the system to a different wall
played.
outlet.
The DATA CD is not recorded in ISO
9660 Level 1/Level 2.
Install a noise filter (commercially
available) on the power cord.
The DATA DVD is not recorded in UDF
(Universal Disk Format).
29
To play a VIDEO CD with PBC
To search for a title/chapter/track,
functions
etc.
When you start playing a VIDEO CD
Ą When playing a DVD
with PBC (Playback control) functions,
1
DISPLAY during
Press
the PBC menu appears for your
playback.
operation.
The pull-down menu appears on
To use the PBC menu, press and hold
the top of the TV screen.
SHIFT , then press the number
2
Press / to move the
buttons to select a desired item
number.
highlight to the title/chapter
number area.
Ą To play without using PBC
3
Press and hold SHIFT , then
Press DVD TOP MENU .
press the number buttons to enter
When turning off the PBC function, you
a title/chapter number ("02" for
can select a desired track by entering a
title 2, "003" for chapter 3, for
track number.
example).
4
to jump to the
To magnify the displayed picture
Press
selected title/chapter.
You can zoom in or zoom out of a
displayed picture when viewing a DVD
VIDEO, a VIDEO CD, an Xvid video or a
JPEG image.
Press ZOOM repeatedly to
magnify the image.
Each time you press the button, the
magnification level changes. You can
scroll the displayed picture up, down,
left or right at the selected
magnification level by pressing
/// .
18
3
Convenient Functions
Press PROGRAM .
"P 01" flashes on the display.
4
Press PRESET +/ˋ (or press and
To use the sleep timer
hold SHIFT , then press the
You can set the system to turn off at a
number buttons) to select a preset
preset time so that you can fall asleep
number.
listening to music.
5
to store the station.
Press
Press and hold SHIFT , then press
6
Repeat steps 2 through 5 to preset
AUDIO/SLEEP repeatedly.
other stations.
Each time you press the button, the
You can preset up to 20 FM stations.
minute display (the remaining time)
The preset stations are retained for
changes by 10 minutes.
about half a day even if you
When selecting "AUTO," the system
disconnect the power cord or if a
automatically turns off after the current
power failure occurs.
disc or USB device is stopped, or within
100 minutes.
To listen to a preset radio station
Ą To cancel the sleep timer function
1
Press FUNCTION repeatedly to
Press and hold SHIFT , then press
select "FM."
AUDIO/SLEEP repeatedly until "OFF"
2
Press PRESET +/ˋ (or press and
appears on the display.
hold SHIFT , then press the
number buttons) to select a preset
number.
3
Press VOLUME +/ˋ to adjust
the volume.
Tip
When an FM stereo program has static
noise, press AUDIO/SLEEP
repeatedly to select "MONO." You will
lose the stereo effect, but reception will
improve.
22
If you forget your password, follow the
[VIDEO] settings
procedure below to confirm the
Ą [Brightness]
currently set password.
Adjusts the picture brightness level.
1
Press FUNCTION repeatedly to
Ą [Contrast]
select the DVD/CD function.
Adjusts the picture contrast level.
2
Press on the unit to open the
Ą [Hue]
disc tray.
Adjusts the picture hue (color tone)
3
Press Ą , ZOOM and
level.
turn.
[CUSTOM PAGE] appears, and you
Ą [Saturation]
can confirm the currently set
Adjusts the picture saturation level.
password.
Ą [Sharpness]
To exit the [CUSTOM PAGE], press
Adjusts the sharpness level of the
SETUP .
picture outline.
Ą [Default]
[PREFERENCE] settings
You can reset all the setup menu
options and your personal settings to
Ą [Rating]
the factory defaults.
You can restrict playback of DVDs that
If you have set a password, make sure
have ratings. Scenes may be blocked or
to unlock password protection by
replaced with different scenes.
entering your password (see
If you have set a password, make sure
"[Password]") before performing reset.
to unlock password protection by
Press to select [Restore], and
entering your password (see
.
then press
"[Password]") before changing the
rating level.
Precautions
Press / to select a rating level
from [0 Lock ALL] to [8 No Limit], then
On placement
.
press
Do not place the system in a confined
Ą [Password]
space where ventilation is poor as
You can set a password for [Rating] and
this may cause overheating.
[Default] settings to avoid unwanted
Do not install the system near heat
operation.
sources such as radiators or air ducts,
or in a place subject to direct
Enter a new 4-digit password, and
sunlight, excessive dust, mechanical
.
then press
vibration, or shock.
When you want to change the
Do not install the system in an
password, enter your password to
inclined position. It is designed to be
unlock the input field, and then enter a
operated in a horizontal position only.
new password.
Do not place heavy objects on the
system.
26
Files on the DATA DVD, DATA CD or
The USB device does not work
USB device cannot be played.
properly.
The system cannot play audio files
If you connect an unsupported USB
with DRM (Digital Rights
device, the following problems may
Management) copyright protection or
occur. Check the information on
files downloaded from an online
websites for compatible USB devices
music store. If you try to play one of
using the URLs listed under
these files, the system plays the next
"Compatible USB Devices with This
unprotected audio file.
System."
There is no playable file on the disc or
ˋ The USB device is not recognized.
USB device.
ˋ File or folder names are not
A video file cannot be played.
displayed on this system.
The video file is larger than 720 (width)
ˋ Playback is not possible.
ˋ The sound skips.
× 576 (height) pixels.
ˋ There is noise.
The name of a folder or file is not
ˋ A distorted sound is output.
displayed correctly.
The system can only display numbers
"OVER CURRENT" appears.
and letters of the alphabet. Other
A problem has been detected with
characters are displayed as "_".
the level of electrical current from the
(USB) port . Turn off the system
A disc does not start playing from the
and remove the USB device from the
beginning.
(USB) port . Make sure there is
The disc is in resume play mode.
no problem with the USB device. If
Pressing Ą once during playback
this display pattern persists, contact
makes the system resume play mode.
your nearest Sony dealer.
When you want to restart playback
The connected USB device cannot be
from the beginning, press Ą twice,
charged.
and then press .
ˋ Make sure the USB device is
Program play or shuffle play mode
connected securely.
may have been selected. Stop
ˋ Turn on the system if the system is
playback and set the play mode to
in standby mode.
normal play.
ˋ Try changing the function to the
A disc cannot be ejected and
USB function. Some USB devices
"LOCKED" appears on the display.
can be charged only when the
Contact your Sony dealer or local
system is set to the USB function.
authorized Sony service facility.
The system does not work normally.
Disconnect the power cord from the
wall outlet, then reconnect after several
minutes.
30
Ą When playing a CD
To play in programmed order
1
DISPLAY during
Press
Select tracks to play in your desired
playback.
order (only for CD-DA discs). A
The pull-down menu appears on
maximum of 16 tracks can be
the top of the TV screen.
programmed.
2
Press / to move the
1
Press PROGRAM .
highlight to the track number
The program menu display appears
area.
on the TV screen.
3
Press and hold SHIFT , then
2
Press and hold SHIFT , then
press the number buttons to enter
press the number buttons to enter
a 2-digit track number ("02" for
a 2-digit track number ("02" for
track 2, for example).
track 2, for example).
4
to jump to the
Press
3
Press and repeat the
selected track.
procedure in step 2 to program
additional tracks.
Ą When playing an audio file/JPEG
4
image file/video file
Press /// to select [PLAY]
Press and hold SHIFT , then press the
to start the program play.
number buttons to enter a 2-digit file
Ą To cancel program play
number ("02" for file 2, for example).
Press Ą , then press . Playback
changes to normal play mode.
Ą To delete the program
Press PROGRAM . Then, press
/// to select [CLEAR], and
.
then
19
Ą To check the setting
To use the play timer
1
Hold down SHIFT , and then
The play timer can be set with the
press ANGLE/TIMER MENU .
DVD/CD, USB, AUDIO IN and FM
2
Press / repeatedly to
functions.
Make sure you have set the clock
select "SELECT," then press
before setting the play timer.
3
Press / repeatedly to
1
Prepare the sound source.
select "PLAY SEL," then press
.
2
Hold down SHIFT , and then
press ANGLE/TIMER MENU .
Ą To cancel the timer
Repeat the same procedure as in "To
3
Press / repeatedly to
check the setting" until "OFF" appears
select "PLAY SET," then press
in step 3, and then press
.
Ą To change the setting
4
Set the time to start playback.
Start over from step 1 of "To use the
Press / repeatedly to set
play timer."
. Follow
the hour, then press
the same procedure to set the
Tip
minutes.
The play timer setting remains until the
5
setting is cancelled manually.
Follow the same procedure as in
step 4 to set the time to stop
playback.
6
Select the sound source.
Press / repeatedly until
the desired sound source appears,
.
then press
7
Press / to turn off the
system.
The system automatically turns on
before the preset time.
If the system is on at the preset
time, the play timer will not be
activated. Do not operate the
system from the time the system
turns on until playback starts.
23
On operation
On your TV's color
If the system is brought directly from
IMPORTANT NOTICE
a cold location to a warm one, or is
Caution: If you leave the same
placed in a very damp room, moisture
image (a still video image, an
may condense on the lenses inside
on-screen display image, etc.)
the unit. Should this occur, the
displayed on your TV for an
system may not operate properly. In
extended period of time, you risk
this case, remove the disc and leave
permanent damage to your
in
the system turned on for about half
television screen. Projection
an hour until the moisture
televisions are especially susceptible
evaporates.
to this.
If anything falls into the cabinet,
unplug the unit and have it checked
On moving the system
by qualified personnel before
Before moving the system, make sure
operating it any further.
that there is no disc loaded, and
remove the power cord from the wall
On cleaning
outlet.
Clean the cabinet, panel, and controls
with a soft cloth slightly moistened
On handling discs
with a mild detergent solution. Do not
To keep the disc clean, handle the
use any type of abrasive pad, scouring
disc by its edge. Do not touch the
powder, or solvent such as alcohol or
surface.
benzine.
Do not attach paper or tape to the
If you have any questions or problems
disc.
concerning your system, please consult
Do not expose discs to direct sunlight
your nearest Sony dealer.
or heat sources such as hot air ducts,
or leave them in a car parked in direct
On cleaning discs, disc/lens cleaners
sunlight, as the temperature may rise
Do not use cleaning discs or disc/lens
considerably inside the car.
cleaners (including wet or spray
types). These may cause the
apparatus to malfunction.
Before playing, clean the disc with a
cleaning cloth. Wipe the disc from the
center outward to the edge.
Do not use solvents such as benzine,
thinner, commercially available
cleaners, or anti-static spray intended
for vinyl LPs.
27
Specifications
Frequency response
DVD (PCM 48 kHz): 20 Hz ˋ 20 kHz
(±1 dB)
Main unit
CD: 20 Hz ˋ 20 kHz (±1 dB)
Amplifier section
Video color system format
Power output (rated):
Latin American models (except for
20 watts + 20 watts (8 ohms at
Argentine model): NTSC
1 kHz, 1% THD)
Other models: NTSC/PAL
Continuous RMS power output
USB section
(reference):
(USB) port:
25 watts + 25 watts (8 ohms at 1
Type A, maximum current: 5 V,
kHz, 10% THD)
500 mA
Inputs
Tuner section
AUDIO IN (3.5 mm stereo mini jack):
Sensitivity 1 V, impedance
FM stereo, FM superheterodyne tuner
50 kilohms
Tuning range:
87.5 MHz ˋ 108.0 MHz (50 kHz step)
MIC (monaural mini jack):
Sensitivity 4 mV, impedance
Antenna: FM lead antenna
10 kilohms
Speaker
Outputs
Speaker system:
VIDEO OUT:
Full range, 8 cm dia., cone type
Max. output level 1 Vp-p,
Rated impedance: 8 ohms
unbalanced, sync negative, load
impedance 75 ohms
Dimensions (W/H/D):
Approx. 148 mm × 240 mm ×
SPEAKERS:
127 mm
Accepts impedance of 8 ohms
Mass: Approx. 1.3 kg net per speaker
Disc player section
Quantity: 2 pieces
System:
Compact disc and digital audio and
General
video system
Power requirements
Laser Diode Properties
Korean model: AC 220 V ˋ 240 V,
Emission Duration: Continuous
50/60 Hz
Laser Output*: Less than 1000 µW
Other models: AC 120 V ˋ 240 V,
50/60 Hz
* This output is the value
measurement at a distance of
Power consumption: 23 watts
200 mm from the objective lens
Dimensions (W/H/D, including largest
surface on the Optical Pick-up
protrusions) (excl. speakers):
Block with 7 mm aperture.
Approx. 170 mm × 133 mm ×
240 mm
31
To play repeatedly
To use the pull-down menu for
various information during
Press REPEAT repeatedly to select
playback
the desired play mode.
The selected mode appears on the
Press
display.
during playback.
"REP CHP": Repeats the current
The pull-down menu appears on the TV
chapter.
screen. In addition to playing time
"REP TIT": Repeats the current title.
information, you can view information
"REP ALL": Repeats all titles/tracks/
such as the current repeat mode,
files.
selected audio format and subtitle
"REP OFF": The system returns to
language, for example. Displayable
normal playback mode.
items vary depending on the playback
"SHUFFLE": Repeatedly plays a
source.
randomly selected file from the
current folder. In this mode, the same
Adjusting the Sound
file may be played more than once.
"REP 1": Repeats the current track or
To generate more dynamic sound
file.
"REP FLD": Repeats the current folder.
Press BASS BOOST repeatedly
Note
during playback to turn the function
on or off.
The selectable modes and their order
The default setting is underlined.
differ depending on the disc or file.
"BASS ON": Generates more dynamic
To view playing time information
sound.
"BASS OFF": Turns off the function.
DISPLAY repeatedly
Press
during playback.
Each time you press the button, the
displayed item changes. You can view
information such as the elapsed
playing time and the remaining time of
the current track/chapter. Displayable
items vary depending on the playback
source.
20
Using the Setup Menu
To change the brightness of the
display
You can make various adjustments to
menu items.
The brightness of the display can be
Displayable items may vary depending
selected from 2 levels.
.
The default setting is underlined.
on the country or region.
The default setting is underlined.
Press DIMMER repeatedly.
1
Press FUNCTION repeatedly to
"DIM OFF": Bright.
"DIM ON": Dark.
select the DVD/CD or USB
function.
About automatic standby function
2
Press SETUP in stop mode.
This system is equipped with an
The setup menu appears.
.
automatic standby function. With this
Selected
function, the system enters standby
category
mode automatically after about 30
minutes if there is no operation or
audio signal output.
You can turn the automatic standby
function on or off. By default, the
automatic standby function is turned
on.
Hold down / on the unit while
the system is on, until "AUTO
STANDBY ON" or "AUTO STANDBY
Setup categories
OFF" appears.
3
Press / to select one of the
setup categories, then press
.
4
Press / to select a setup
item, then press or
5
Press / to select the option
you want to change, and then
press
selection.
6
Press SETUP to turn off the
setup menu.
24
On heat buildup
Power
Although the system heats up during
operation, this is not a malfunction.
The power is not turned on.
At high volume, over long periods of
Check that the power cord is connected
time, the cabinet becomes hot. This is
securely.
not a malfunction. However, touching
The system does not enter automatic
the cabinet should be avoided.
standby mode.
Place the system in a location with
The automatic standby function is
adequate ventilation to prevent heat
invalid for the FM function.
buildup in the system.
The system may not enter standby
To prevent a malfunction, do not
mode in the following cases:
cover the ventilation openings.
ˋ when an audio signal is detected.
ˋ when a USB device is connected.
Troubleshooting
ˋ during playback of audio tracks or
files.
If you experience any of the following
ˋ while the preset play timer or sleep
difficulties while using the system,
timer is in process.
check this troubleshooting guide to try
to remedy the problem before
Picture
requesting repairs. Should the problem
persist, consult your nearest Sony
There is no picture.
dealer.
The video connecting cord is not
Note that if service personnel changes
connected securely.
The unit is not connected to the
some parts during repair, these parts
may be retained.
correct TV input jack.
The system is not selected via the
If "PROTECT" appears on the
video input of the TV.
display
Make sure you connect the system
Immediately unplug the power cord,
and your TV using the video cord
and check the following items after
(supplied) so that you can view the
"PROTECT" disappears.
pictures.
Are the + and ˋ speaker cords
short-circuited?
Even though you set the aspect ratio
Is anything blocking the ventilation
in "[TV Type]" under "[SCREEN]
holes of the system?
settings," the picture does not fill the
After you have checked these above
TV screen.
items and found no problems,
The aspect ratio is fixed on the disc.
reconnect the power cord, and turn
on the system. If the issue persists,
contact your nearest Sony dealer.
28
Mass (excl. speakers):
ABOUT MPEG-4 VISUAL: THIS
Approx. 1.4 kg
PRODUCT IS LICENSED UNDER THE
MPEG-4 VISUAL PATENT PORTFOLIO
Quantity of the main unit: 1 piece
LICENSE FOR THE PERSONAL AND
Supplied accessories:
NONCOMMERCIAL USE OF A
Remote Commander (1)
CONSUMER FOR DECODING VIDEO IN
FM lead antenna (1)
COMPLIANCE WITH THE MPEG-4
Video cord (1)
VISUAL STANDARD ("MPEG-4 VIDEO")
Speaker pads (8)
THAT WAS ENCODED BY A
Design and specifications are subject
CONSUMER ENGAGED IN A PERSONAL
to change without notice.
AND NONCOMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG
Standby power consumption: 0.5 W
LA TO PROVIDE MPEG-4 VIDEO.
H alogenated flame retardants are
NO LICENSE IS GRANTED OR SHALL
not used in the certain printed wiring
BE IMPLIED FOR ANY OTHER USE.
boards.
ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO
Licences and Trademarks
PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING
This system incorporates Dolby*
MAY BE OBTAINED FROM MPEG LA,
Digital.
LLC. SEE http://www.mpegla.com/
* Manufactured under license from
All other trademarks and registered
Dolby Laboratories.
trademarks are of their respective
"Dolby" and the double-D symbol
holders. In this manual,
are trademarks of Dolby
marks are not specified.
Laboratories.
"DVD" logo is a trademark
of DVD Format/Logo
Licensing Corporation.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and Thomson.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/
or other countries.
This product is protected by certain
intellectual property rights of
Microsoft Corporation. Use or
distribution of such technology
outside of this product is prohibited
without a license from Microsoft or
an authorized Microsoft subsidiary.
32
DISPLAY repeatedly
Selected
setup item
Options
.
to confirm your
®
TM
and
Advertisement
