Receiving & Handling; Receiving; Storage - Toshiba HCV-5HA Instruction Manual

RECEIVING & HANDLING

RECEIVING

Upon receipt of the equipment, make an immediate inspection for any damages which may have occurred
during shipment. When the contactor is received it should be unpacked sufficiently to inspect for concealed
damage and to determine that the shipment is complete and correct. If any damage is found it should be
noted prior to accepting the shipment if possible.
Check for things such as, damage to the container, water seepage or moisture on the contactor. Check the
nameplate to confirm that the ratings meet the intended application.
If any parts are damaged or missing, file a claim immediately with the carrier and notify the Toshiba sales
office. Try to give as much information as possible when filing a claim.
HANDLING & STORAGE
Vacuum contactors should be handled with care to avoid damage. Contactors should be kept in an upright
position and moved with suitable equipment.
If the contactor is to be stored over any length of time, the packing material should be restored for protection
during that period. Where conditions permit, the packing should be left intact until the contactor is ready for
installation. Store the contactor in a dry and dust free area. It should not be left outdoors or in adverse
conditions. If unprotected, corrosion, rust and insulation deterioration will occur.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Page 7