CHAPTER 7. SYSTEM BLOCK DIAGRAM /WIRING DIAGRAM SYSTEM BLOCK DIAGRAM ......7-1 WIRING DIAGRAM LC-60H20T ....7-2 WIRING DIARAM LC-70H20T ....... 7-3 Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
LC-60H20T/LC-70H20T SAFETY PRECAUTION IMPORTANT SERVICE PRECAUTION IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING All checks must be repeated with the AC cord plug connection reversed.
LC-60H20T/LC-70H20T PRECAUTIONS FOR USING LEAD-FREE SOL- PRECAUTIONS FOR USING LEAD-FREE SOLDER Employing lead-free solder • PWBs of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type oflead-free solder.
LC-60H20T/LC-70H20T OUTLINE-MAJOR SERVICE PARTS PWB UNIT ription LC-60H20T MAIN Unit DKEYMG542FM01 DUNTKG505FM01 COCORO EYE DUNTKG504FM01 NET BOARD RUNTKB285WJQZ POWER Unit DUNTKG477FMG1 T-CON Unit LC-70H20T MAIN Unit DKEYMG542FM02 DUNTKG505FM01 COCORO EYE DUNTKG504FM01 NET BOARD RUNTKB286WJQZ POWER Unit DUNTKG477FMG2 T-CON Unit OTHER UNIT...
The HDMI 5 and 電腦 (PC) terminals can both use the same audio input terminal. • As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.
LC-60H20T/LC-70H20T CHAPTER 2. OPERATION MANUAL [1] OPERATION MANUAL Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Page 7
“SMART POWER CONTROL” IS PRIORITY. Power indicator will display Green even if other setting also turn On at the same time. If the “Assist Light mode” is turned On, Power indicator will display weak White during standby mode. • The illustrations used throughout this manual are based on LC-60H20T. 2 – 2...
Page 8
“Audio select” menu. • The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations. • The illustrations used throughout this manual are based on LC-60H20T. 2 – 3...
LC-60H20T/LC-70H20T Part names and functions Remote control unit a / b / c / d (Cursor) Select a desired item on the setting screen. 確定 (ENTER) Execute a command. 10 色彩調整 ( 靜止 ) [(COLOUR ADJ.) (FREEZE)] Freeze a motion picture on the screen and adjust the colour tone of the still image.
LC-60H20T/LC-70H20T CHAPTER 4. REMOVING MAJOR PARTS [1] REMOVING MAJOR PARTS [1] REMOVING OF MAJOR PARTS REMOVING OF THE STAND UNIT AND REAR CABINET 1.Remove the 4 lock screw [1] and detech stand unit [2]. 2.Remove 1 lock screw [3] and detech the AC cord cover [4].
Page 13
LC-60H20T/LC-70H20T [2] Removing of connectors & PWB 1.Disconnect the following connectors from Main Unit. (SP,RA,KM,LWwires) 2.Disconnect the following connectors from the POWER Unit.(PD,PL,LED wire) 3.Disconnect the following connectors from the LCD CONTROL Unit .(T-Con FFC wayer) 4.Remove 4screws [1]Main Unit ,remove 6 screws [2] Power unit & remove 4 screws [3]...
2) Insert USB device to the USB terminal at the LCD TV. (Make sure the latest software is installed in the USB device.) 3) Use below menu procedure to st art upgrading software version : FOR LC-60H20T/LC-70H20T Option System data - Menu...
Page 15
LC-60H20T/LC-70H20T LCD TV ADJUSTMENT ITEM 1. VCOM ADJUSTMENT i. Enter service mode key and go to VCOM/TEST PATTERN Page ii. Press “Enter” key (at VCOM) iii. Adjust the flicker effect by pressing “VOL +/-“ of RC key iv. Press “Enter” key after get the best value 2.
Page 16
NOT to write multiple data. Also, when data writing location parts is broken, please change PWB board (since the concerned IC is non-exchangeable part). Note: a) MAC Address is from Sharp IT department b) WMDRM Key is from SEM Enginering department 5.
Page 17
LC-60H20T/LC-70H20T a) Adjustment Mode Adjustment Mode Press the test key at the test remote control b) Component 15K 50Hz Signal Adjustment (COMP-SD) Setting [Signal] Feed the COMPONENT 15K 50Hz (576i) 100% Full-field COMP 15K 50Hz Colour Bar signal(100% colour saturation) to...
Page 18
LC-60H20T/LC-70H20T At the related page, move cursor to [COMP HD ADJ], press Auto Adjustment Test Mode page 5 ENTER. (COMP HD) [OK] appears when finished. d) PC (ANALOG RGB) Signal Adjustment (PC-RGB) Setting [Signal] Feed the XGA 60Hz 100% Checkered pattern signal (100%...
Page 19
LC-60H20T/LC-70H20T MGMB**** RB to the reference value of point 1. (18) Adjusted value is writing at [command] MSET0003 (19) Set the G of point Max. to the default value (4080 x G value of point 2 / R2). Set the R,B Max.
Page 20
LC-60H20T/LC-70H20T 6. FACTORY SETTING AC power is plug off after shipment setting is done. Caution: Do not plug on again after shipment setting is done. If do, please re-do the shipment setting. Do not off with remote control. ITEM Factory setting AC power off to exit 1.
LC-60H20T/LC-70H20T [2] USB CLONE SPECIFICATIONS [3] USB CLONE SPECIFICATIONS [2] USB Clone (Smart Loader) 1. Description The Smart Loader is a function implemented in the service software to easily replicate the user settings of one TV into another. These settings include (but not restricted to): picture and audio, turning set-up, language and country selection, PIN, child locked programs etc.
LC-60H20T/LC-70H20T [4] PUBLIC MODE SETTING [5] PUBLIC MODE SETTING [3] PUBLIC MODE SETTING PROCEDURE 1. How to start Public Mode • There are the following two ways to get the public mode setup screen displayed. 1) Press the “INPUT” and “VOL (+)” keys on the set at once and turn on the power.
Page 23
LC-60H20T/LC-70H20T 4. Public Mode Menu The guidance is not displayed onscreen. Setup procedure • To move the cursor up and down, use the cursor UP/DOWN key (remote controller) and CH ( ) key (remote controller and set). • To change the settings, use the cursor RIGHT/LEFT key (remote controller) and VOL (+)/(‒) key (remote controller and set).
Page 24
LC-60H20T/LC-70H20T 3. VOLUME FIXED Selection Selection between Variable ,''Fixed'' and ''AC/RC CTRL'' ( loop provided ). Default Variable Explanation Sound volume is fixed and made invariable. Limit in setting • The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting is made impossible.
Page 25
LC-60H20T/LC-70H20T 8. OSD DISPLAY Selection Selection between Yes , No (loop provide) Default Explanation The following OSD displays are made ineffective. Displays of menu group, channel call, sound volume bar and direct key call Limit in setting • Set time of the OFF-timer (SLEEP TIMER) is cleared.
Page 26
LC-60H20T/LC-70H20T 12. PRESET CHANNEL PLAN Selection Selection between "ON" and "OFF" Default Explanation [ON] : Display preset channel plan when power on. [OFF]: Not display preset channel plan. (Default setting) Remark When hotel mode is ON and PRESET CHANNEL PLAN is [ON], press power ON (Panel or R/C key), it displays preset channel plan on the screen.
LC-60H20T/LC-70H20T CHAPTER 6. TROUBLESHOOTING TABLE [1] TROUBLESHOOTING TABLE [2] TROUBLESHOOTING TABLE [1] TROUBLESHOOTING TABLE No power (front LED failure to light up) or no startup (front LED failure to turn from red to blue ) Are the wire harnesses and other cables properly connected in...
Page 28
LC-60H20T/LC-70H20T With [RF] signal input No video onscreen (1) No video in the UHF/VHF reception Is there IF output from the tuner pin( 8 ) , ( 9 ) of TU1102 as specified? Check TU1102 and its peripheral circuits. Is there IF input at pin W1 & W2 of IC3301 ? r i c &...
Page 29
LC-60H20T/LC-70H20T With <Component> signal input No video onscreen (3) No external input video onscreen <INPUT 6> Is INPUT 6 selected on the input select menu screen? Select INPUT 6 on the input select menu screen to pick up the right input signal.
Page 30
LC-60H20T/LC-70H20T No audio heard (1) No sound in the UHF/VHF reception. Check TU1102 and its peripheral circuits. Is the IF output from the tuner pin(8) & (9) of TU1102 as specified ? Is there the 12C signal input a t pins (W4 ), (W5) of IC3301? Check IC3301 and its peripheral circuits.
Page 31
LC-60H20T/LC-70H20T No audio heard (2) No external audio heard <INPUT 7> Is there the L-ch audio signal input from pin (7) ofinput terminal J502 to pin (U4) of IC3301? Is there the R-ch audio signal input from pin (5) ofinput terminal J502 to pin (V5 ) of I C3301? <INPUT 6>...
Page 32
LC-60H20T/LC-70H20T No audio heard (3) No HDMI sound heard (*INPUT1/INPUT2/INPUT3 is digital audio ) Refer to "(HDMI1/HDMI2/HDMI3/HDMI4/HDMI5) video onescreen (HDMI)" HDMI1/HDMI2/HDMI3/HDMI4/HDMI5 > < t i r Are waveforms input in to the pin( C4 , D 4 / C 3 , D 3 / W 7 , V 8 ) Check peripheral circuits IC3301.
Page 33
LC-60H20T/LC-70H20T No audio heard (4) No sound from the HDMI sound input terminal. (INPUT 1 analog audio) Is there the L-ch audio signal input from pin (2) of external input terminal J506 (HDMI AUDIO IN) to pin (U3) of IC3301?
Page 53
PARTS GUIDE No. SZ4M67LC-60/70H20T LED BACKLIGHT TV LC-60H20T MODEL: LC-70H20T CONTENTS PRINTED WIRING BOARD LCD PANEL ( LC-60H20T ) ASSEMBLIES LCD PANEL ( LC-70H20T ) LCD PANEL SUPPLIED ACCESSORIES CABINET AND MECHANICAL PARTS ( LC-60H20T ) PACKING PARTS ( NOT REPLACE-...
Page 54
LCD PANEL MODULE UNIT ( LC-70H20T ) RUNTKB270WJZZ LED BAR ( LC-60H20T ) LED BAR ( LC-70H20T ) RUNTKB273WJZZ T-CON UNIT DUNTKG477FMG1 [3] CABINET AND MECHANICAL PARTS ( LC-60H20T ) CANGKE266WJ01 VESA ANGLE ASSEMBLY, x4 LANGKE266WJFW VESA ANGLE VESA SHAFT NSFTZA460WJFN...
Page 55
LC-60H20T/LC-70H20T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [4] CABINET AND MECHANICAL PARTS ( LC-70H20T ) SCREW FOR POWER LX-BZA408WJF7 FOR SP LX-EZA085WJF7 12*12*t0.7 PSPAHC681WJ00 45*35*t0.7 PSPAHC804WJ00 TCON CPU COOLER PSPAZC854WJKZ PTPEZA359WJZZ SHADING TAPE-T SHADING TAPE-B PTPEZA360WJZZ PC SHEET(BTN)
Page 57
LC-60H20T/LC-70H20T [7] LCD PANEL ( LC-70H20T ) KS B/L CHASSIS CCHSMA729WJ22 B/L CHASSIS LCHSMA729WJ2W KS P-CHASSIS TOP L CHLDZC186WJ21 LHLDZC186WJ2Z P-CHASSIS TOP L CHLDZC187WJ21 KS P-CHA TOP R P-CHASSIS TOP R LHLDZC187WJ2Z KS P-CHA L CHLDZC190WJ02 P-CHASSIS L LHLDZC190WJKZ KS P-CHA R...
LC-60H20T/LC-70H20T PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] SUPPLIED ACCESSORIES Supplied accessories “AAA” size battery ( g 2) Remote control unit Other accessories X6 • Operation manual X7 • Warranty certifi cate Stand unit PRICE PART PARTS CODE...