38
en | Settings
6.3.3
Recording
Enter here the relevant settings for each connected channel. In most cases you can encode 2
streams for each connected channel. If required, use the Default button to reset all encode
fields to the factory default. Use the Copy button to copy identical settings from one channel
to other channel(s).
Encode settings are:
–
Channel: Select a connected channel (default is 1)
–
Type: Select from Regular/Motion/Alarm (default is Regular)
–
Resolution: System
–
–
–
Frame rate (per second):
–
Bit rate in Kb/second (this will depend on the setting for Resolution above):
2016.09 | v1.0 | AM18-Q0717
Stream 1
Stream 2
Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Bosch Security Systems