NEC DTerm Series I Quick Reference Manual

support@straightlinecomm.net
DTerm Series I (ITN)
Quick Reference Card
Some of the features described in this
Quick Reference Card might require
Additional programming in the
Communication Server.
© NEC Unified Solutions 2010
All rights are reserved. Reproduction in whole or in part is prohib-
ited without the written consent of the copyright owner1.
All brand names and product names in this document are trade-
marks
Issue: SL-1.0
straightlinecomm.net
p: (732) 952-2800
f:: (732) 952-2799
1. Call Indicator Lamp
This lamp flashes when a call terminates to the terminal
and lights steadily when a message is available.
3. LCD
Displays call information and options, menu information
and soft keys.
4. Exit
This key allows you to exit from the Menu or Help mode
and go back to the main screen.
5. Soft Keys
The Soft Keys show the available features for your current
activity. Any feature shown at the bottom of the LCD is
available.
6. Help
Press this key to display information about the Soft Keys
that are in the current LCD display.
7. Programmable Keys
These can be additional Line Keys or Feature Keys. Press a
key to get dial tone for that line or to execute the pro-
grammed feature code.
8. Recall
Press key to finish the call and hear the dial tone.
9. Feature
Used to activate any features and to program One-Touch
Speed Dial Keys.
10. Conf
Press key to establish a three-way conversation. The LED
on key lights when key is active.
11. Mic
Press this key to mute the microphone: the LED is OFF.
Press the key again to un-mute the microphone. Be
aware that this key is only for the hands-free micro-
phone and does not have any effect on the headset.
12. Redial
Press key to activate redial feature.
13. Answer
When the LED is ON, press the key to answer a waiting
call.
14.Speaker
Controls the built-in speaker which can be used for
Hands Free dialing / monitoring.
15. Directory
Not Available
16. Message
Not Available