Attaching The Stand - HP t620 PLUS Hardware Reference Manual

Attaching the stand

CAUTION:
the computer.
The computer can be used in either a tower or horizontal orientation with the stand included with the
computer.
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as USB flash drives, from the computer.
3. Turn off the computer properly through the operating system, and then turn off any external
devices.
4. Disconnect the power cord from the power outlet and disconnect any external devices.
5. Attach the stand to the computer.
●
Attach the stand to the bottom of the computer to use the computer in the tower orientation.
a.
b.
c.
●
Attach the stand to the right side of the computer to use it in the horizontal orientation.
a.
b.
c.
The computer must be operated with the stand attached to ensure proper airflow around
Turn the computer upside down and locate the two screw holes in the grid on the
bottom of the computer.
Position the stand (1) over the bottom of the computer and line up the captive
thumbscrews in the stand with the screw holes in the computer.
Tighten the captive thumbscrews (2) securely.
Lay the computer down with the right side up and locate the two screw holes in the
grid on the right side of the computer.
Position the stand (1) over the side of the computer and line up the captive
thumbscrews in the stand with the screw holes in the computer.
Tighten the captive thumbscrews (2) securely.
Attaching the stand 9