Chapter 7
Scenario: IPsec Remote-Access VPN Configuration
Information to Have Available
Starting ASDM
78-18003-02
•
•
•
•
•
•
•
•
Before you begin configuring the adaptive security appliance to accept remote
access IPsec VPN connections, make sure that you have the following
information available:
Range of IP addresses to be used in an IP pool. These addresses are assigned
•
to remote VPN clients as they are successfully connected.
List of users to be used in creating a local authentication database, unless you
•
are using a AAA server for authentication.
Networking information to be used by remote clients when connecting to the
•
VPN, including the following:
IP addresses for the primary and secondary DNS servers
-
IP addresses for the primary and secondary WINS servers
-
Default domain name
-
List of IP addresses for local hosts, groups, and networks that should be
-
made accessible to authenticated remote clients
This section describes how to start ASDM using the ASDM Launcher software.
If you have not installed the ASDM Launcher software, see Installing the ASDM
Launcher, page 5-5.
Implementing the IPsec Remote-Access VPN Scenario
ASA 5505 Getting Started Guide
7-3