Sony FD Trinitron KV-28FX66U Quick Start Manual page 2

Correcting the Picture
Slant
Because of the earth's magnetism, the picture might slant.
By following the instructions below, you can correct the
picture slant if it is necessary.
a) If it is not necessary, press OK to
If picture slants, please
select Not necessary.
adjust picture rotation
b) If it is necessary, press
Not necessary
Adjust now
to select Adjust now, then press
OK and correct any slant of the
Select: Confirm: OK
picture between –5 and +5 by
pressing
OK to store.
The automatic tuning menu appears
Do you want to start
on the TV screen.
automatic tuning?
Yes
No
Assign an ID to your
Remote Control
This TV set is provided with a locator button to easy find the Remote Control (see page
6 of the instruction manual). Before your use this locator button, you can asign an ID
(number) to your Remote Control to avoid interferences from other locators.
You can assign an ID (number) to
Remote Control ID
your Remote Control to avoid
Do you want to configure your
Remote Control ID? interference from other locators
Yes
when you press the Remote Control
No
Locator button on the TV set.
Select: Confirm: OK
a) If you do not want to configure it,
press OK to select No.
b) If you want to configure it
Remote Control ID
press
Introduce New ID Next press one of the number
with number buttons:
buttons (0-9) and press OK to
store.
-
Enter: 0-9 Confirm: OK
Remote Control ID
New ID is: 5
Now beeping, please
press any button to stop.
Confirm: OK
Finally press OK to continue the
process.
6
Automatically Tuning
the TV
You need to tune the TV to receive channels.
By following the instructions below, this TV automatically
searches and stores all available broadcast channels for you.
or
or . Finally press
7
to select Yes. Press OK.
The remote control beeps.
Press OK to stop beeping.
ID should be assigned
anytime the batteries of the
remote control will be
replaced.
8
Do you want to start
Press the OK button on the remote
automatic tuning?
control to select Yes.
Yes
No
Auto Tuning
The TV starts to automatically search
Programme: 1
and store all available broadcast
Channel: C 01
channels for you.
Searching...
This procedure could take some
minutes.
Please be patient and do not press
any buttons while the automatic
tuning is in progress. Otherwise
automatic tuning will not be
completed.
In some countries the TV
Broadcaster installs the channels
automatically (ACI system). In
this case, the TV Broadcaster
sends a menu in which you can
select your city by pressing
the or button and OK to
store the channels.
If no channels were found
No channel found
Please connect aerial during the auto tuning process
Confirm then a new menu appears
automatically on the screen
asking you to connect the aerial.
Please connect the aerial (see
step 3) and press OK. The auto
tuning process will start again.
When the automatic tuning is finished,
Programme Sorting
the Programme Sorting menu appears on
Programme:
01 TVE2
the screen.
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select Channel: Confirm:
Your television stations are now stored in your television's memory.
Changing the Programme Order
of the broadcast channels
By following the instrutions below, you can rearrange the
order in which broadcast channels appear on the screen.
a) If you wish to keep the broadcast channels in
the tuned order:
• Press the MENU button on the
Programme Sorting
remote control to exit and
Programme:
01 TVE2
return to the normal TV screen.
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Your TV is now ready for use.
Select Channel: Confirm:
b) If you wish to store the broadcast channels in
a different order:
• Press the
Programme Sorting
remote control to select the
Programme:
01 TVE2
programme number with the
02 TVE
03 ANT3
broadcast channel you wish to
04 TELE5
05 C+
rearrange, then press the
06 C44
Select Channel: Confirm: button.
• Press the
Programme Sorting
remote control to select the new
Programme:
01 TVE2 41 TVE
programme number position for
02 TVE
03 ANT3
your selected broadcast channel,
04 TELE5
05 C+
then press the OK button.
06 C44
Select new position Move: OK
• Repeat all the above steps if you
wish to change the order of the
other broadcast channels on your
TV.
• Press the MENU button on the
remote control to exit and return
to the normal TV screen.
Your TV is now ready for use.
9
or button on the
or button on the