Dear SHARP customer Important Safety Precautions Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many • Stand base must be attached to prevent the TV set from falling down and cause injuries.
• Do not attach or detach the stand without holding it. Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand. • The illustrations used throughout this manual are based on LC-50LE275X.
AUDIO SERVICE ONLY DIGITAL viewing is output from the terminal.) (R/L) AUDIO OUTPUT • The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software. • The illustrations used throughout this manual are based on LC-50LE275X.
DTV mode: Display the programme channel list. (VOLl) Decrease the volume. (See page 10.) e (Mute) • The illustrations used throughout this manual are based on LC-50LE275X. INFO Press e s Mutes sound. DTV mode: Display the programme information. Press e again s Restores sound.
• A region or service selection screen may display depending “DTV + ATV”, and then press ENTER. • The illustrations used throughout this manual are based on LC-50LE275X. on the country settings or cable providers selections. Follow • Auto installation will be executed.
On-Screen Display Menu Watching TV H Manual adjust Programme edit Programme setup Selecting a preset AV mode You can set some channel items manually. Use this menu to set up a channel individually. Repeat steps 1 to 3 in Auto search. Digital setting “AV mode”...
Programme setup receiving no programme signals. (Enable, Disable) H DNR (Digital Noise Reduction) “Eagle View” technology produces a sharp picture Auto installation • Five minutes before the power shuts down, the remaining Reduces noise on screen and produces a clearer from the original moving picture.
Page 10
On-Screen Display Menu H Audio return channel H Quick start Clearing the password Audio description (DTV input mode only) This function allows you to adjust volume output of Allows you to clear your password. If this function is set to “Auto”, the TV can send You can reduce the TV’s start-up time after turning audio description if the TV receives a signal including audio data for video content shown on the TV...
On-Screen Display Menu H Input select H Demo (store mode only) Displaying subtitles for the hearing impaired Time zone You can display subtitles for the hearing impaired in This function enables you to select your local time For setting the signal type of external equipment. When “Store mode”...
Direct Button Operation ATV (Analogue TV) Switching the analogue audio ATV/DTV/RADIO buttons You can run the auto installation to set channels automatically. format Use the following buttons on the remote control to To watch the analogue TV, select “ATV” from operate the menu.
Direct Button Operation In the TV mode of A2 TV broadcasts Reminder timer setting Colour adjustment and still When receiving a stereo signal You can schedule a reminder for future programmes. image Each time you press MPX, the mode switches What is an EPG? Channel will automatically change on time as between STEREO and MONO.
• The illustrations used throughout this manual are based NOTE on LC-50LE275X. • Teletext can display only when it is sent by a network. Not used to convert between languages. - 12...
Page 15
USB Media Player Control panel for photo/music/movie mode operations List of fi les compatible with USB mode • Press B to display the control panel below. Button/ USB device/File system USB Memory/FAT/FAT32/NTFS Description Photo Music Movie menu Photo file format JPEG (.jpg)/PNG/BMP When selecting a folder icon: Enter this directory.
0°C — 40°C • Make sure that headphones are not connected. • As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for • The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and contracts product improvement without prior notice.
CLEARING THE PASSWORD Dimensional drawings If you forget the password, clear the password using the following procedure. Unit : mm LC-65LE275X Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a /b to select “Child lock”, and then press 1457 ENTER and the password input screen display.