Mitsubishi Electric D90-WIFI-1 Quick Start Manual

PRINT PHOTOS
FROM YOUR PHONE
Set your Wi-Fi connection to:
1
.SelFone_WiFi_Print
*If your browser opens automatically, tap "Start Application" and follow
instructions.
*If no browser opens, proceed to Step 2
2
iPhone
Open Safari browser
and start application
*For other internet browsers, go to any webpage that starts with http://
(not https)
3 Follow on-screen instructions to select
photo from your phone, or take a new
picture to print.
Android
Open Android browser
and start application
SELFONE WIRELESS PRINT STATION™
MODEL
D90-WIFI-1
INSTALLATION SETUP
Assembly
1. Attach metal plate to the back of the D90 printer using (2) silver
screws. (Note: Make sure to point arrow up on metal plate)
2. Attach black screw to the back of the NUC.
3. Insert NUC with attached screws to the metal plate on the back of the
D90 printer.
4. Connect USB Cable to the D90 printer and power adapter to the NUC.
5. Plug NUC to an outlet and press power button on the NUC.
*Make sure D90 Printer power is on before powering up the
NUC.
Washers Silver
Screws
1.
Metal Plate
3.
QUICK START GUIDE
Parts List
Contents Qty. Description
NUC 1 Wireless device
1 Ft. USB Cable 1 Connection to D90 printer
Power Adapter 1 Connection to power
Metal Plate 1 Attaches to the NUC
Black Screws 2 Screw hooks to for the NUC
Silver Screws 2 Screws for metal plate
Washer 2 Washers for metal plate
Installation Set-up Guide 1 QRef Manual
Manual 4 Intel Manual
2.
Back Screws
NUC
USB connection
Type B
Power Adapter
4.
USB connection
Type A
Power
Button