Usb Device - Sony HT-IV300 Operating Instructions Manual

Hide thumbs Also See for HT-IV300:
Table of Contents

Advertisement

Tuner
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the antenna
(aerial).
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual tuning.
Playback
File names are not displayed
correctly.
t The system can only display JIS X
0208:1997 (JIS level-1 and level-2
kanji sets) compliant character
formats. Other character formats may
be displayed differently.
t Depending on the writing software
used, the input characters may be
displayed differently.
A file does not start playing from the
beginning.
t Resume play has been selected. Press
OPTIONS and select [Play from start],
then press
.
The language for the soundtrack/
subtitle or angles cannot be changed.
t Multilingual tracks/subtitles or multi-
angles are not recorded on the VIDEO
being played.
Playback does not start from the
resume point where you last stopped
playing.
t The resume point may be cleared from
memory depending on the file when
• you disconnect the USB device.
• you play other content.
• you turn off the main unit.
Playback is unstable when using
Screen mirroring.
t Depending on the usage environment,
devices emitting radio waves such as
other wireless LAN devices or
microwave ovens may interfere with
the Screen mirroring. Move the main
unit and the screen mirroring
compatible device away from such
devices, or turn off such devices.
t Depending on the usage environment,
communication speed may be affected
by the distance or obstacle between
devices, types of device, device
configuration, radio waves.
Communication may be lost due to line
congestion.
Some paid contents cannot be played.
t The source device must be compatible
with HDCP (High-bandwidth Digital
Content Protection) system.
Some paid contents may not be
displayed via a non-compatible source
device.

USB device

The USB device is not recognized.
t Try the following:
1 Turn the system off.
2 Remove and reconnect the USB
device.
3 Turn the system on.
t Make sure that the USB device is
securely connected to the
port.
t Check if the USB device or a cable is
damaged.
t Check if the USB device is on.
t If the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the main
unit.
(USB)
59
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents