8
ASSEMBLY AND PREPARATION
Assembly Instructions
- The picture may differ from the actual product.
NOTE
Before installing the product, if there are any water drops or foreign materials on the inner/outer side of
y
y
the glass, wipe them out with a soft cloth.
While using the product, if there are any water drops or foreign materials on the inner/outer side of the
y
y
glass, wipe them out with a soft cloth and install it again.
Assemble the product in a clean, uncontaminated area to prevent dust or foreign material from entering
y
y
it.
1
Place a soft cloth on the table and place the Multi-touch Overlay Kit over it as illustrated.
2
Remove the internal protective film using the handle at the upper right corner of the glass as illustrated.