Manual Installation - D-Link COVR-C1203 User Manual

Section 2 - Installation
If you do not wish to use the D-Link Wi-Fi app, you can manually set up the COVR-C1203 and configure your Covr Wi-Fi network using
the web-based user interface. Follow the instructions below to set up your COVR-C1203 AC1200 Dual Band Whole Home Wi-Fi System.
1. Position the Covr Point labeled A close to your Internet-connected modem. Next, connect the power adapter and plug
the Covr Point into a power outlet.
2. Wait for Covr Point A to boot up. When the COVR LED starts blinking orange, wirelessly connect your PC or laptop to the
Wi-Fi name (SSID) printed on the back of the device, or on the included Wi-Fi Configuration Card.
D-Link COVR-C1203 User Manual

Manual Installation

G
Wi-Fi
SSID
Password
Wi-Fi
A
10