Siemens PRIMERGY 560 Operating Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Server
  5. PRIMERGY 560
  6. Operating manual
Siemens PRIMERGY 560 Operating Manual

Siemens PRIMERGY 560 Operating Manual

Intel-based server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PRIMERGY 560
Intel-based Server
Operating Manual

Advertisement

Table of Contents
loading

Related Manuals for Siemens PRIMERGY 560

Summary of Contents for Siemens PRIMERGY 560

  • Page 1 PRIMERGY 560 Intel-based Server Operating Manual...
  • Page 2 Please send us your comments quoting • one of our IT Service Shops the order number of the manual. • your sales partner Siemens AG • your sales office Redaktion ICP CS BS2 OS ID 4 The addresses of our IT Service Shops Otto-Hahn-Ring 6 can be found in the guarantee coupon D-81730 München...
  • Page 4 Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Siemens AG D-33094 Paderborn D-81730 München Bestell-Nr./Order No.: A26361-K412-Z107-3-7619 A26361-K412-Z107-3-7619...
  • Page 5 Introduction Important notes PRIMERGY 560 Preparation for use and operation Settings in BIOS Setup Property and data protection Operating Manual Troubleshooting and tips System expansions Boards and cabling Technical data Index October 1998 edition...
  • Page 6 Your training needs? The Siemens Training Centers offer you a wide range of training courses in information technology and on IT products and other subjects - onsite near to your workplace or offsite at one of our training centers. Let us know your training requirements or request information from us -...

  • Page 7: Table Of Contents

    Contents Introduction ......................1 Features ........................2 Notational conventions .................... 3 Important notes ..................... 5 Safety ........................5 Manufacturer’s notes ....................6 CE certificate ....................6 FCC Class A Compliance Statement ............... 7 Power cord selection ..................8 For the United States and Canada ..............
  • Page 8 Contents Property and data protection ................31 BIOS Setup security functions ................31 Setting the Setup password ................33 Setting the System password ................. 35 Troubleshooting and tips..................37 Power-on indicator remains dark after you have switched on your device ....
  • Page 9 Contents Boards and cabling ..................... 75 SCSI platter with SAF-TE function ................ 75 Disk array controller and standard controller on internal drives ......77 Two standard controllers on internal drives ............78 Technical data ..................... 79 Index ........................81 A26361-K412-Z107-3-7619...

  • Page 11: Introduction

    Introduction The PRIMERGY 560 is an Intel-based server for medium-size and large networks and can be equipped with up to four Pentium Pro processors. Its highly developed hardware and software components provide a high degree of reliability and availability. Hardware components include hot-plug power supplies and hot-replace hard disks, and memory modules with EDC option (Error Detection and Correction).

  • Page 12: Features

    Server management is implemented on the system board with the aid of the supplied ServerView software and PDA (Prefailure Detection and Analyzing) technology from Siemens. The PDA analyzes and monitors all components relevant to system reliability, thus enabling early detection of overload situations and appropriate counter-measures.

  • Page 13: Notational Conventions

    Notational conventions Introduction Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to texts marked with this symbol. Failure to observe this warning endangers your life, destroys the system, or may lead to loss of data.

  • Page 15: Important Notes

    Important notes In this chapter you will find information regarding safety which it is essential to take note of when working with your server. The manufacturer's notes contain helpful information on your server. Safety Pay attention to the information provided in the manual "Safety and Ergonomics".

  • Page 16: Manufacturer's Notes

    Important notes Manufacturer's notes Boards with electrostatic sensitive devices (ESD) may be identified by labels. When you handle boards fitted with ESDs, you must observe the following points under all circumstances: • You must always discharge yourself (e.g. by touching a grounded object) before working.

  • Page 17: Fcc Class A Compliance Statement

    • Consult the dealer or an experienced radio/TV technician for help. Siemens AG is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Siemens AG. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.

  • Page 18: Power Cord Selection

    Important notes Manufacturer's notes Power cord selection The power cord for this unit has been packed separately and has been selected according to the country of destination. It must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set.

  • Page 19: For The United Kingdom

    Manufacturer's notes Important notes For units set at 115 V: use a parallel blade, grounding type attachment plug rated 15 A, 125 V (Figure 2). For units set at 230 V (domestic use): use a tandem blade, grounding type attachment plug rated 15 A, 250 V (Figure 3). Figure 2 Figure 3 For units set at 230 V (outside of the United States and Canada):...

  • Page 20: Disposal And Recycling

    Do not throw lithium batteries or accumulators into the trashcan. They must be disposed of in accordance with local regulations concerning special waste. If you have any questions on disposal, please contact your local office, our service department, or, directly: Siemens AG ICP CS Recycling Center D-33094 Paderborn Tel.: ..49 5251 818010 Fax: ..49 5251 818015...

  • Page 21: Energy Saving Under Windows Nt

    Transporting the server Important notes Energy saving under Windows NT Using the Powersaver screen blanker (file POWERSAV.SCR) you can lock the mouse and keyboard so that no input can be made. If the attached monitor and screen controller support power management in accordance with VESA (DPMS), the monitor can be switched into power-saving mode at the same time.

  • Page 23: Preparation For Use And Operation

    Preparation for use and operation Please take note of the safety information in the chapter " Important notes". Unpacking and checking the delivery If you need to lift or transport the server, ask someone to help you. It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date Ê...

  • Page 24: Setting Up The Server

    Preparation for use and operation Setting up the server Setting up the server Do not expose the server to extreme environmental conditions (see chapter "Technical data"). Protect it from dust, humidity and heat. There must be a clearance of at least 200 mm in front of and behind the server to ensure adequate ventilation.

  • Page 25: Connecting External Devices

    Connecting the server Preparation for use and operation Disconnecting cables • Turn off all power and equipment switches. • Pull all power plugs out of the grounded power outlets. • Unplug all data communication cables from the utility sockets. • Disconnect the relevant cables at the server and at the peripherals.

  • Page 26: Connecting The Server To The Line Voltage

    Preparation for use and operation Connecting the server Connecting the keyboard Ê Plug the round plug of the keyboard cable into the keyboard port on the server. Plug the other connector of the keyboard cable into the socket on the Ê...
  • Page 27 Connecting the server Preparation for use and operation Set the correct line voltage range at the switch on the right of the power Ê supply modules. Switch position Line voltage range 230 V 200 V - 240 V 115 V 100 V - 125 V Refit all power supply modules.

  • Page 28: Unlocking/Locking The Server

    Preparation for use and operation Unlocking/locking the server Unlocking/locking the server Turn the key clockwise (1). Ê Ê Open the door (2). Perform the necessary operations. Ê Ê Shut the door (3). Turn the key counterclockwise (4). Ê A26361-K412-Z107-3-7619...

  • Page 29: Controls And Indicators

    Controls and indicators Preparation for use and operation Controls and indicators 1 = ON/OFF switch 7 = Power supply power-on indicator 2 = Floppy disk access indicator 8 = Hard disk drive power-on indicator 3 = CD-ROM access indicator 9 = Hard disk drive access indicator 4 = Server power-on indicator 10 = Hard disk error indicator 5 = SCSI indicator...
  • Page 30 Preparation for use and operation Controls and indicators Power-on indicator (server) The indicator lights up when the server is switched on. SCSI busy indicator lights up green, when data is transferred on a SCSI channel. lights up green and yellow alternatingly if no hard disk drive may be installed or withdrawn.

  • Page 31: Switching The Server On And Off

    Switching the server on and off Preparation for use and operation Switching the server on and off Press the ON/OFF switch (1). Ê If the server is switched on, the power-on indicator (2) lights up green. The server runs a self-test immediately it is switched on. If after switching on the server there is nothing but flickering stripes on the screen, switch the server off immediately (see "Troubleshooting and tips...

  • Page 32: Configuring The Server

    Preparation for use and operation Configuring the server Configuring the server ServerStart With the ServerStart CD provided you can configure the server and install the operating system in a convenient manner. The menu-guided configuration includes server configuration with SCU, EISA configuration with ECU, ISA configuration with ICU and the disk array controller configuration with DACCF.
  • Page 33 Configuring the server Preparation for use and operation The following EISA configuration disks are supplied with your server: • Configuration Utility Disk • Configuration Library Disk with additional CFG files Ê Deactivate the write protection and insert the configuration utility disk into the floppy disk drive.

  • Page 34: Icu Utility

    Preparation for use and operation Configuring the server ICU Utility You can configure plug&play boards and standard ISA boards with the utility ICU (ISA Configuration Utility). You can also use ICU to check the system resources of the server (e.g. interrupt assignment). Operating instructions for the ICU program are provided in the corresponding manual.

  • Page 35: Cleaning The Server

    Cleaning the server Preparation for use and operation Note on SCO UNIX The DAC manual mentions the utility DAC960 when describing SCO UNIX installation. The name for this utility is no longer correct. Enter mdac instead. Note on Novell Netware 3.12: If you want to install Novell Netware 3.12, you must first set the APIC function (if existing) to Disabled in the Advanced menu in the BIOS Setup.

  • Page 37: Settings In Bios Setup

    Settings in BIOS Setup In BIOS Setup you can set the system functions and the hardware configuration of the server. When the server is delivered, the default entries are valid (see Technical Manual for the system board). You can customize these settings to your requirements in BIOS Setup.
  • Page 38 Settings in BIOS Setup Calling BIOS Setup PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd. Main Advanced Security Server Exit Item Specific Help System Time: [19:47:37] System Date: [04/06/1996] Diskette A: [1.4M] Diskette B: [None] Hard Disk 1: None Hard Disk 2: None Boot Options Video Display:...

  • Page 39: Operating Bios Setup

    Operating BIOS Setup Settings in BIOS Setup Operating BIOS Setup If you change entries in BIOS Setup, make a note of the changed entries (e.g. in the technical manual for the system board), or print out the changed screen page. To do so, the printer must be connected to the server through the parallel interface.

  • Page 40: Exiting Bios Setup

    Settings in BIOS Setup Exiting BIOS Setup Exiting BIOS Setup To exit BIOS Setup, select the Exit menu from the menu bar. You can then decide which settings you want to save. The Exit menu offers the following options. You must mark the required option and activate it with the Enter key.

  • Page 41: Property And Data Protection

    Property and data protection For protecting your system and personal data from unauthorized access, you can use the BIOS Setup security functions. The lockable server door also offers protection against unauthorized access and operation of the server power switch. The server has an anti-theft feature. At the bottom right on the rear there are two holes through which you can feed a steel cable for securing the server to an immovable object.
  • Page 42 Property and data protection BIOS Setup security functions Preventing unauthorized access to the settings of boards with their own BIOS You can activate this protection by selecting the value Extended for Setup Password Lock field in the Security menu. Preventing system booting from the diskette drive You can activate this protection by selecting the value Diskette Lock for the System Load field in the Security menu.

  • Page 43: Setting The Setup Password

    BIOS Setup security functions Property and data protection Setting the Setup password The Setup password prevents unauthorized calling of BIOS Setup. BIOS Setup can be called only by those who know the Setup password. The password must be four to eight characters in length. All alphanumerical characters can be used;...
  • Page 44 Property and data protection BIOS Setup security functions Canceling Setup password If you cancel the Setup password, you automatically deactivate the system password. To cancel the Setup password (without setting a new password): Call BIOS Setup and select the Security menu (see "Settings in BIOS Setup").

  • Page 45: Setting The System Password

    BIOS Setup security functions Property and data protection Setting the System password The system password prevents unauthorized access to your server. With the system password you can either prevent booting of the operating system or lock the keyboard. The system can be accessed only by those who know the system password.
  • Page 46 Property and data protection BIOS Setup security functions Canceling system password To cancel the system password (without setting a new password): Call BIOS Setup and select the Security menu (see "Settings in BIOS Setup"). Ê Mark the Set System Password field and press the Enter key. Ê...

  • Page 47: Troubleshooting And Tips

    Troubleshooting and tips Take note of the safety hints in the manual "Safety and Ergonomics" and in the chapter "Preparation for use and operation", when you connect or disconnect cables. If a fault occurs, try to correct it as described: •...

  • Page 48: Server Switches Itself Off

    Troubleshooting and tips Server switches itself off Error in the power supply module The power-on indicator of the defective power supply module does not light. Ê Exchange the defective power supply module. If you have a redundant power supply, there is no need to switch the server off to exchange the defective power supply module.

  • Page 49: Flickering Stripes On The Monitor Screen

    Troubleshooting and tips Wrong monitor port used If you have installed an additional monitor controller, then the monitor controller and the monitor port on the system board are switched off. Ê Connect the monitor cable to the proper monitor port. Power cable or monitor cable not connected Switch off the monitor and the server.

  • Page 50: No Screen Display Or Display Drifts

    Troubleshooting and tips No screen display or display drifts The wrong frequency and/or resolution has been selected for the monitor or for the application program. Find out which horizontal frequency your monitor screen supports. You will Ê find the horizontal frequency (also known as line frequency or horizontal deflection frequency) in the documentation of your monitor.

  • Page 51: The Floppy Disk Cannot Be Read Or Written

    Troubleshooting and tips The floppy disk cannot be read or written Check whether the write protection of the floppy disk is activated. Ê In the BIOS Setup check the entry for the floppy disk drive. Ê Check in the BIOS Setup whether the diskette drive controller and write Ê...
  • Page 52 Troubleshooting and tips EISA configuration restoring (Load SCI file from the floppy disk) Ê Insert the configuration utility disk in floppy disk drive. The disk must not be write protected. Ê Restart the system. Having run through its power-on self-test, the system starts the EISA configuration utility from the floppy disk.
  • Page 53 Troubleshooting and tips Press the Enter key. Ê The Save and exit screen appears. Select the item Save the configuration and restart the computer and press the Ê Enter key (if necessary, more than once) to bring up the Reboot screen. Press the Enter key to restart the system.

  • Page 54: System Will Not Boot After Installing Hard Disk Drives

    Troubleshooting and tips System will not boot after installing hard disk drives If you operate the hard disks on a standard SCSI controller: Call the SCSI configuration menu and check the settings for the hard disks Ê (SCSI Device Configuration) and the settings under Advanced Configuration Options.

  • Page 55: System Expansions

    System expansions This chapter describes how to modify your server hardware (e.g. installing or removing boards or accessible drives). Memory and processor upgrading as well as replacement of the lithium battery are described in the Technical Manual for the system board. You will find an overview and a brief description of the installed system boards on the left-hand housing side cover of the server.

  • Page 56: Removing The Top Panel

    System expansions Opening the server Removing the top panel Remove the two screws (1). Ê Lift the top panel at the front by 5 to 7 mm (2) and push it out of the server in Ê the direction of the arrow (3). The server cannot be switched on after the top panel has been removed (safety switch).

  • Page 57: Removing The Control Panel

    Opening the server System expansions Push the inner cover forward as far as it will go (1) and lift it off (2). Ê Removing the control panel Press down on the two plastic levers (1) and tilt the control panel out of the Ê...

  • Page 58: Removing The Side Cover

    System expansions Opening the server Removing the side cover Remove the screw (1). Ê Lift the side panel out of the server in the direction of the arrow (2). Ê A26361-K412-Z107-3-7619...

  • Page 59: Assembling The Server

    Assembling the server System expansions Assembling the server If you have fully opened the server, you must proceed as follows to reassemble it: 1. Mounting the side cover. 2. Mount the control panel. 3. Mount the top panel. Mounting the side cover Ê...

  • Page 60: Mounting The Control Panel

    System expansions Assembling the server Mounting the control panel Insert the hooks (1) of the control panel in the appropriate recesses of the Ê server. Ê Push the control panel in the direction of the arrow (2) up against the server until you feel both plastic clips engage.

  • Page 61: Mounting The Top Panel

    Assembling the server System expansions Mounting the top panel Ê Fit the inner cover (1 + 2). Ê Push the top cover into the server in the direction of the arrow (1) as far as it will go. Ensure that the hooks on the underside of the top cover engage in the corresponding recesses on the rear of the server.

  • Page 62: Installing And Removing A Scsi Hard Disk Drive

    System expansions Installing and removing a SCSI hard disk drive Installing and removing a SCSI hard disk drive The server can accommodate six carriers for 3 1/2-inch hard disk drives. A Fast- Wide SCSI hard disk drive or an Ultra-Wide SCSI hard disk drive with an SCA interface and a maximum height of 1.6 inch can be installed in each carrier.
  • Page 63 Installing and removing a SCSI hard disk drive System expansions Ê Press both locking levers downwards (1) and then swing them both outwards as far as possible (2). Ê Withdraw the hard disk carrier out of the server (3). If a hard disk drive is already installed in the carrier you have just withdrawn, you must remove it.
  • Page 64 System expansions Installing and removing a SCSI hard disk drive Place the new hard disk drive in the carrier (1) and push it in the direction of Ê the arrow (2) until it locks in place. Press the contact strips into place at both sides of the carrier (3). Ê...

  • Page 65: Installing A Remoteview Hard Disk Drive

    Installing a RemoteView hard disk drive System expansions Installing a RemoteView hard disk drive In order to use the Remote Test and Diagnosis System RemoteView on the server, you must install the optional RemoteView hard disk drive which contains the RemoteView software.
  • Page 66 System expansions Installing a RemoteView hard disk drive Screw the RemoteView hard disk drive to the mounting plate. Ê Ê Place the RemoteView hard disk drive with mounting plate in the corresponding mounting supports of the server (1 + 2) and fasten it using the screw (3).
  • Page 67 Installing a RemoteView hard disk drive System expansions You must enter the hard disk parameters in BIOS-Setup and boot from the hard disk once using these parameters in order for RemoteView to be started automatically later. Proceed as follows: Ê Start the server and invoke BIOS Setup.

  • Page 68: Installing And Removing A Power Supply Module

    System expansions Installing and removing a power supply module Installing and removing a power supply module If the power-on indicator of a power supply module goes off during operation, then the module is defective and must be replaced. If the server has three power supply modules, trouble-free replacement can be carried out during operation.

  • Page 69: Installing And Removing An Accessible Drive

    Installing and removing an accessible drive System expansions Push the new power supply module into the server (1) and secure it with the Ê two quarter-turn fasteners (2). If you remove a power supply module without replacing it, you must refit the bay cover.

  • Page 70: Installing An Accessible 5 1/4-Inch Drive

    System expansions Installing and removing an accessible drive Installing an accessible 5 1/4-inch drive Remove the top panel, side panel and control panel (see " Opening the Ê server"). Select a bay appropriate to the height of the drive. Ê Ê...
  • Page 71 Installing and removing an accessible drive System expansions Ê Push the drive carrier into the server (1) and secure it (and the drive cover, if only a half-height drive is installed) with the four screws (2). Ê Connect the data lines and the power lines to the disk drives. Remove the top panel, side panel and control panel (see "...

  • Page 72: Removing An Accessible 5 1/4-Inch Drive

    System expansions Installing and removing an accessible drive Removing an accessible 5 1/4-inch drive Remove the top panel, side panel and control panel (see " Opening the Ê server"). Disconnect the data line and power line from the drives in the drive carrier to Ê...
  • Page 73 Installing and removing an accessible drive System expansions Ê Push the drive carrier into the server (1) and secure it and the drive covers with the four screws (2). Ê If there is still a drive in the drive carrier, connect the data line and the power line.

  • Page 74: Changing The Floppy Disk Drive

    System expansions Installing and removing an accessible drive Changing the floppy disk drive Remove the top panel and the control panel (see " Opening the server") Ê Disconnect the data line and the power line from the floppy disk drive. Ê...
  • Page 75 Installing and removing an accessible drive System expansions Ê Push the drive carrier into the server (1) and secure it with the two screws (2). Connect the data line and the power line to the floppy disk drive. Ê Ê Mount the control panel, and the top panel (see "...

  • Page 76: Installing And Removing Boards

    System expansions Installing and removing boards Installing and removing boards Ê Before installing or removing a board, please read the documentation supplied with the board. Installing a board Remove the top cover and the side cover (see "Opening the server"). Ê...
  • Page 77 Installing and removing boards System expansions Place the board in the desired slot (1) and fasten it with the screw you Ê removed earlier (2). If necessary, connect the lines to the board. Ê Mount the side panel and the top panel (see " Assembling the server").

  • Page 78: Removing A Board

    System expansions Installing and removing boards Removing a board Remove the top cover and the side cover (see "Opening the server"). Ê Remove the lines connected to the board. Ê Remove the screw (1) and pull the board out of the slot (2). Ê...

  • Page 79: Installing A Second Processor Board

    Installing a second processor board System expansions Installing a second processor board The server can be fitted with two processor boards. If only one processor board is fitted, a terminating board must be installed in the slot for the second processor board.
  • Page 80 System expansions Installing a second processor board Screw the second processor board onto the processor mounting plate. Ê Place the processor mounting plate with the processor board in the upper Ê processor slot (1) and attach it firmly using the two knurled screws (2). Connect a free power line to the power supply connector on the processor Ê...

  • Page 81: Installing The Se/De Converter Boards

    Installing the SE/DE converter boards System expansions Installing the SE/DE converter boards SE/DE (single-ended/differential-ended) boards are available in the following versions: • 1-channel (one SCSI channel is implemented on a board, i.e. the board has one SCSI-SE input and one SCSI-DE output) •...
  • Page 82 System expansions Installing the SE/DE converter boards Remove the cover plates of the slots into which you want to insert the boards Ê (the bottom three can be used). Remove the accompanying mounting screws (1) on the back of the server and take out the cover plate toward the inside (2).

  • Page 83: Extensions On The System Board

    Extensions on the system board System expansions Attach the SCSI lines (1) and the cascaded power supply line (2) to the built-in Ê boards. Attach a free power supply line from the server (e.g. from the RemoteView Ê hard disk) to the cascaded power supply line (3). Mount the side panel and the top panel (see "...

  • Page 85: Boards And Cabling

    Boards and cabling SCSI platter with SAF-TE function S C S I I D 1 S C S I I D 0 S C S I I D 3 S C S I I D 4 S C S I I D 6 S C S I I D 2 1 = System indicator connector 4 = SCSI segment 1...
  • Page 86 Boards and cabling Assignment of carrier, SCSI ID and SCSI segment Carrier SCSI ID SCSI segment top left top right center left center right bottom left bottom right Carriers seen from front A26361-K412-Z107-3-7619...

  • Page 87: Disk Array Controller And Standard Controller On Internal Drives

    Boards and cabling Disk array controller and standard controller on internal drives The standard SCSI controller controls the accessible SCSI drives. The disk array controller controls the hard disk drives. All three SCSI channels are led to the hard disk carriers via the SCSI platter. c o n t r o l p a n e l C D - R O M s e c o n d...

  • Page 88: Two Standard Controllers On Internal Drives

    Boards and cabling Two standard controllers on internal drives Standard SCSI controller 1 controls the accessible SCSI drives. Standard SCSI controller 2 controls the hard disk drives. SCSI channel 0 is led to all hard disk carriers via the SCSI platter. c o n t r o l p a n e l C D - R O M s e c o n d...

  • Page 89: Technical Data

    Technical data Electrical data (server) Rated voltage range: 100 V - 125 V / 200 V - 240 V selectable Frequency: 50 Hz - 60 Hz Rated current in basic configuration: 100 V - 125 V / 3 A 200 V - 240 V / 1.8 A Max.

  • Page 91: Index

    Index Ê Ë 5 1/4-inch drive installing removing Accessible drive installing installing a 5 1/4-inch drive removing removing a 5 1/4-inch drive Alarm indicator Assembling server BIOS access, preventing BIOS Setup calling changing exiting write protection BIOS Setup 27, operating preventing calling saving Board...
  • Page 92 Index removing safety Board BIOS, preventing access Bold typeface Boot sector Cable connecting disconnecting Cables connecting disconnecting Cabling Call BIOS Setup preventing CAN bus CD-ROM access CD-ROM drive Indicator: CE certificate CFG Library Disk Class A Compliance Statement Cleaning Clearance Configuration BIOS Setup Disk Array Controller...
  • Page 93 Index configuration defective drive DAC960 DACCF Dark screen Data protection Date, not correct Defective drive Devices connecting interface Differential-ended Dimensions Disk Array Controller configuring 22, Disposal Drifting screen display Drive defective EISA configuration restoring saving Electrical data Electromagnetic compatibility Energy saving Environmental class Environmental conditions Environmental data...
  • Page 94 Index server switches itself off system cannot be restarted 41, wrong date wrong time Error message dead Extensions system board External devices ports FCC statement Features hard disk subsystem power supply server management system board Flickering stripes, monitor screen Floppy disk access Floppy disk drive changing indicator...
  • Page 95 Index ICU 22, ICU utility IDE hard disk drive IDE interface Indicating alarm CD-ROM drive floppy disk access hard disk drive power-on indicator hard disk drive access hard disk error power-on indicator power supply server remains blank SCSI busy Indicator test switch Indicators Information further...
  • Page 96 Index Keyboard cleaning connecting keyboard port locking Line voltage range Lithium battery Locking server Main memory Main switch Message error Monitor cleaning flickering stripes on the screen port Monitor screen error message Mounting side cover top cover. Mouse mouse pointer not displayed no mouse pointer PS/2 port No mouse pointer...
  • Page 97 Index disposal energy saving important safety Novell Netware 3.12 ON/OFF switch Opening server Operating system installing not starting 41, preventing startup 31, Operating system not starting 41, Operation Overview preparing for use SCSI platter server Packing material Parallel interface Password canceling Setup password canceling System password setting system password...
  • Page 98 Index overview Processor Processor board, installing Processor mounting plate Property protection PS/2 mouse port Quotation marks RAID level Recycling Remote Test and Diagnosis System RemoteView RemoteView hard disk drive, installing Removing 5 1/4-inch accessible drive accessible drive board control panel floppy disk drive power supply module SCSI hard disk drive...
  • Page 99 Index installing removing: SCSI ID accessible drives SCSI platter SCSI segment 75, SE/DE converter board, installing Second processor board, installing Security functions, BIOS Setup Security measures Select, power cord Serial interface Server assembling cleaning configuration connecting connecting to power voltage features locking opening...
  • Page 100 Index Setup password canceling changing setting Side cover removing Side panel mounting Single-ended SSLAUNCH Standard SCSI controller 77, configuring Summer time Surface Switch Switching off Server Switching off protection Switching on protection Switching on, server Symbols, explanation of System locking System board extensions System expansions...
  • Page 101 Index Top cover mounting removing Trouble added drive defective dark screen drifting screen display error message dead flickering stripes on the monitor screen floppy disk cannot be written no mouse pointer power-on indicator fails to light server switches itself off system cannot be restarted 41, wrong date wrong time...

Table of Contents