Canon imageCLASS LBP701BC Quick Setup Manual

Quick Setup Guide
KOR
THA
RT5-0685 (000) XXXXXXXXXX

Important Safety Instructions

This manual describes only warnings and cautions for the installation and the power
supply. Be sure to read "Important Safety Instructions" described in the e-Manual (HTML
manual) included in the supplied CD-ROM also.
Installation
- Do not install the printer in a location near alcohol, paint thinner,
or other flammable substances. If flammable substances come
into contact with electrical parts inside the printer, this may result
in a fire or electrical shock.
- Do not place the following items on the printer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water
or liquids
If these items come into contact with a high-voltage area inside
the printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer,
immediately turn OFF the power switch (1) and disconnect the
interface cables if they are connected (2). Then, unplug the
power plug from the AC power outlet (3) and contact your local
authorized Canon dealer.
- Do not install the printer in unstable locations, such as on
unsteady platforms or inclined floors, or in locations subject to
excessive vibrations, as this may cause the printer to fall or tip
over, resulting in personal injury.
- The ventilation slots are provided for proper ventilation of
working parts inside the printer. Never place the printer on a soft
surface, such as a bed, sofa, or rug. Blocking the slots can cause
the printer to overheat, resulting in a fire.
- Do not install the printer in the following locations, as this may
result in a fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a
cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
- When installing the printer, gently lower the printer to the
installation site so as not to catch your hands between the printer
and the floor or between the printer and other equipment, as this
may result in personal injury.
- When connecting the interface cable, connect it properly by
following the instructions in the e-Manual. If not connected
properly, this may result in malfunction or electrical shock.
- When moving the printer, follow the instructions in the e-Manual
to hold it correctly. Failure to do so may cause you to drop the
printer, resulting in personal injury.
Hư ng d n Cài đ t Nhanh
VIE
© CANON INC. 2011 PRINTED IN CHINA
User Software
Symbols
Indicates a warning concerning operations that
may lead to death or injury to persons if not
performed correctly. To use the machine safely,
always pay attention to these warnings.
Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.
Power Supply
- Do not damage or modify the power cord. Also, do not place
heavy objects on the power cord or pull on or excessively bend it,
as this can cause electrical damage, resulting in fire or electrical
shock.
- Keep the power cord away from all heat sources. Failure to do so
can cause the power cord insulation to melt, resulting in a fire or
electrical shock.
- The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fire.
- The power cord may become damaged if it is stepped on, fixed
with staples, or if heavy objects are placed on it. Continued use
of a damaged power cord can lead to an accident, such as a fire
or electrical shock.
- Do not plug or unplug the power plug with wet hands, as this can
result in electrical shock.
- Do not plug the power cord into a multi-plug power strip, as this
can result in a fire or electrical shock.
- Do not bundle up or tie up the power cord in a knot, as this can
result in a fire or electrical shock.
- Insert the power plug completely into the AC power outlet. Failure
to do so can result in a fire or electrical shock.
- If excessive stress is applied to the connection part of the power
cord, it may damage the power cord or the wires inside the
machine may disconnect. This could result in a fire. Avoid the
following situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet or the
connection part.
- Applying a shock to the power connector.
- Do not use power cords other than the one provided, as this can
result in a fire or electrical shock.
- As a general rule, do not use extension cords. Using an
extension cord may result in a fire or electrical shock.
- Do not use a power supply voltage other than that listed herein,
as this may result in a fire or electrical shock.
- Always grasp the power plug when unplugging the power plug.
Do not pull on the power cord, as this may expose the core wire
of the power cord or damage the cord insulation, causing
electricity to leak, resulting in a fire or electrical shock.
- Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug,
you may be unable to unplug it in an emergency.
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
KOR
THA
Đ c s tay hư ng d n này trư c tiên.
VIE
Hãy đ c s tay hư ng d n này trư c khi v n hành s n ph m này.
Sau khi b n đ c xong s tay hư ng d n này, hãy c t nó
kh o v sau.
Before installing the printer, read the cautions carefully which are described below.
KOR
THA
VIE Trư c khi cài đ t máy in, hãy đ c c n th n nh ng th n tr ng đư c mô t bên dư i.
English
To avoid the risk of personal injury or damage to the printer,
and for legal information, make sure to read the "Legal
Notices" and "Important Safety Instructions" in the
e-Manual included on the accompanying CD-ROM
carefully before using the printer.
User Software
" " "
"
CD-ROM
m t nơi an toàn đ tham
Ti ng Vi t
C NH BÁO
Đ tránh r i ro v thương tích cá nhân ho c hư h ng máy
in, và đ bi t thông tin pháp lý, đ m b o đ c "Các Lưu Ý
V Lu t Pháp" và "Các Ch d n An toàn Quan tr ng" trong
Hư ng d n s d ng đi n t có trong CD-ROM đi kèm m t
cách c n th n trư c khi s d ng máy in.
Ph n m m dành cho ngư i dùng