Table of Contents
Advertisement
Product Description
ATX motherboard
interfaces
PS/2
Printer
LPT1
RS 232
COM1 - COM2
VGA
USB1 – USB4
Network
Sound
Type plate
8
Interfaces up to C6240-0040
1
4
2
PS/2 connections
The upper PS/2 connector (1) allows a PS/2 mouse to be used, while a PC
keyboard can be connected to the lower PS/2 connector (2).
Parallel interface
The parallel interface (3) corresponds to the Centronics standard, and is
addressed by the software as LPT1.
Serial interfaces
The basic version of the Industrial PC has two serial interfaces, COM1 (4)
and COM2, using the type RS 232, which are each brought to a 9 pin
SUB-D plug connector. The interface COM2 is located in the upper part of
the first slot right beside the ATX-slot.
VGA connection
A 15-pin SUB-D socket connector (5) allows a VGA monitor to be
connected.
USB interfaces
The four USB interfaces (6 - 9) are used to connect peripheral devices with
USB connections.
Network connection
The RJ-45 connector (10) allows the PC to be connected to a Local Area
Network (LAN).
Sound-On-Board
The Industrial PC has a on-board-interface with the following connectors:
Line In jack (11), Line Out jack (12) and Microphone jack (13).
Additional plug-in cards (optional)
A type plate is located on top of the PC, providing information about the
Industrial PC equipment as delivered.
3
5
6
7
10
11
12
8
13
9
C6240
Advertisement
Table of Contents
