Advertisement
Connecting to the Reader
To connect via host name:
Open a browser. Recommended browsers are IE6, IE7, IE8, or
1.
Mozilla 3.
Enter the host name, provided on a label on the reader, in the
2.
browser (e.g., http://fx7400cd3b0d) and press Enter.
The User Login window appears and the reader is ready.
NOTE Connect the reader to a network that supports host
name registration and lookup to ensure the network can
access the reader using the host name. For instance,
some networks can register hostnames through DHCP.
When first connecting to the reader, it is recommended
to keep DHCP enabled in both the PC and in the
reader, although it is not guaranteed that host name will
work all the time.
As an alternative to using the host name on the reader
label, construct it using the reader MAC address on the
bottom of the reader. To do this, enter the prefix
FX7400, followed by the last six characters of the MAC
address. For example, for a MAC address of
0023683BA63A, use the prefix FX7400, followed by
3BA63A. Enter http://FX74003BA63A in the browser
address bar to access the reader.
Additional Information
Following are links to additional information and software:
Product Manuals:
•
http://www.motorolasolutions.com/supportcentral/fx7400
This page includes the following guides:
-
FX Series RFID Reader Integrator Guide
(p/n 72E-122490-xx)
-
FX7400 Series RFID Reader Quick Start Guide
(p/n 72-154246-xx)
-
FX7400 Series RFID Reader Regulatory Information
(p/n 72-125267-xx)
-
ShowCase II User Guide (p/n 72E-122491-xx)
•
Data Sheet:
http://www.motorola.com/FX7400
•
ShowCase II and other related software:
http://www.motorolasolutions.com/supportcentral/fx7400
Service Information
If you have a problem using the equipment, contact your facility's
Technical or Systems Support. If there is a problem with the
equipment, they will contact Motorola Solutions Support at:
http://supportcentral.motorola.com
For the latest version of this guide go to:
http://supportcentral.motorola.com
Advertisement
