Advertisement
Green = No mould conditions;
-
than dew point temperature
Yellow = Deviation to optimal conditions
-
Red = Surface temperature corresponds with dew point temperature
-
If a there are mould conditions red LED turns on indicating that there is a
risk.
Additionally the blinking of the different icons are indicating
possible root causes:
•
Humidity Icon: Relative Humidity is too high (>60 %)
•
Surface Temperature Icon: Problem with the insulation, object's surface
temperature is too low
•
Room Temperature Icon: Room temperature is too low (below 12, 6 °C)
Please note: the tool is not able to detect mould. Merely, it indicates mould
conditions.
Permanent measurement – Scanning on the wall
For making permanent measurements, press the measuring button (4) and keep it
held. The laser will be kept switched on. Point the laser slowly successively at all
surfaces to be measured. The laser will switch off as soon as the measuring button
(4) will not be pressed any longer. Finally, the measured results will be shown on the
display.
Technical background: Surface temperature is higher
Advertisement
