Introduction - Siemens SIROTEC Planning Manual

1 Introduction

To attain the electromagnetic compatibility (EMC) requested in the EMC Guideline
of a complete plant (control and drive engine), EMC measures on the part of the
control manufacturer and user (including machine tool manufacturer) are required.
Concerning
manufacturer
Concerning
user
Fig. 1-1
!
Important
To secure the EMC, you must pay attention to the:
·
product-specific EMC measures contained in
the EMC Guidelines,
·
to project or operate only permitted combinations and
·
to use the accessories provided in the product-specific documentation
(e.g. ready-made wiring) or equivalent.
© Siemens AG, 2004. All rights reserved
EMC Installation Guideline – Planning Guide (EMV) – 03.2004 Edition
EMC compatible
design
(electrically and
mechanically)
EMC compatible
installation
(in the room with
cabling)
Securing the EMC
EMC compatible total system
n
1-11