Remote Panel Interface; Shot Box Control Unit; Auxiliary Control Panel - Sony DVS-7200 Product Manual

Table of Contents

Advertisement

BKDS-8060
BKDS-8061
BKDS-8062
DVS-7200 • Product Guide

Remote Panel Interface

The BKDS-8060 Remote Panel Interface is the support interface and electronics
for the BKDS-8061 Shot Box Control unit and BKDS-8062 Auxiliary Control
Panel.
The BKDS-8060 provides an RS-422 interface that can be used with several
connectors on the DVS-7200 electronics chassis and control panel. The following
configurations are possible with a single BKDS-8060:
Two BKDS-8061 units.
One BKDS-8061 and one BKDS-8062 units.
Up to four BKDS-8062 units.
Several BKDS-8060 units may be connected in series via RS-422A
looping connectors.
In the "Installation Guide" chapter, refer to the "System Interconnection Charts"
section for a diagram of several control panel connection examples.
Note that RS-422 interconnect cables are not provided. In the "Options and
Upgrades" section, see the "System Cables, RS-422" heading for part numbers
and information. RS-422 interconnect cables have a maximum length of 100
meters.

Shot Box Control Unit

The BKDS-8061 Shot Box Control Unit installs with the BKDS-8060 Remote
Panel Interface unit. Up to two BKDS-8061 panels can be housed (side-by-side) in
one rack unit. A single BKDS-8061 provides 20 buttons for recalling switcher
snapshots and effects. When two units are installed, 40 functions can be recalled.
Note that a one-meter 15-pin interconnect cable is provided (RCC-5A).

Auxiliary Control Panel

The BKDS-8062 Auxiliary Control panel installs with the BKDS-8060 Remote
Panel Interface unit. Up to 14 combined BKDS-8062 plus BKDS-8060 units can be
connected to the DVS-7200 chassis for remote control of Aux buses 1 through 14.
The DVS-7200 supports five different configurations of crosspoint assignments for
the BKDS-7015 control panel and BKDS-8062 — allowing multiple users to have
unique crosspoint configurations. A single BKDS-8062 can access 20 dedicated
crosspoints, or up to 38 dedicated crosspoints (via SHIFT button). Note that a one-
meter 15-pin interconnect cable is provided (RCC-5A).
SONY
Configuration Guide • • 21

Advertisement

Table of Contents
loading

Table of Contents