Sealey AP5520SS Instruction Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear
Instruction Protective
Manual gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
product.
Locate in a suitable work area.
9
DO NOT let children near the cabinet.
8
DO NOT open more than one drawer at a time.
8
Fill from the bottom drawer up. If the tool cabinet is filled from the top drawer down, it will be top heavy and may fall over.
9
DO NOT attempt to lift by the side handles, use chains, ropes or other lifting devices.
8
DO NOT step or climb on the product or on the drawers.
8
DO NOT alter the product in any way, e.g. do not weld on external lock bars or attach electrical equipment. This may cause damage to
8
the product or cause personal injury.
Keep on a level surface.
9
When moving the cabinet DO NOT pull it. Push the cabinet to prevent injury.
9
Close and lock the drawers before moving the cabinet. If the drawers came open they could make the cabinet unstable.
9
Apply the brakes when in desired position.
9
DO NOT mount on a truck bed or any other moving object.
8
Be aware of sharp edges wear gloves.
8
2. INTRODUCTION
Anti-fingerprint stainless steel construction with a 38mm thick wooden worktop. 45kg capacity drawers with aluminium pull handles and non-slip
liners. Four large castor wheels, two fixed and two swivel (which include brakes). Comes with heavy-duty side handle for comfort and control
when manoeuvring. Supplied with locks and keys.
3. SPECIFICATION
Model no: ............................................................ AP5520SS
Overall size (W x D x H): ..................... 1475 x 505 x 1860mm
Medium 1/2 drawer (x3): ...........................375 x 395 x 65mm
Large 1/2 drawer (x1): .............................375 x 395 x 140mm
X-large 1/2 drawer (x1): ..........................375 x 395 x 220mm
Medium drawer (x3): .................................855 x 395 x 65mm
Large drawer (x1): ...................................855 x 395 x 140mm
X-large drawer (x1): ................................855 x 395 x 220mm
Wall cabinet (x2): ....................................645 x 300 x 410mm
© Jack Sealey Limited
INSTRUCTIONS FOR
MOBILE STAINLESS STEEL TOOL CABINET
10 DRAWER WITH BACKBOARD & 2 WALL CUPBOARDS
AP5520SS
MODEL NO:
Original Language Version AP5520SS | Issue 1 - 10/05/16