Philips AJ3200 Short User Manual page 2

Charge your mobile devices
1
Connect the clock radio with your mobile device.
• For Android-powered mobile device with a micro USB socket: use the supplied cable to connect the product with the mobile device;
•
For Apple device with a lightning or 30-pin connector: use the charging cable of the Apple device (not supplied) to connect the product with the mobile device.
2
Connect the clock radio to AC power.
» The mobile device begins to charge.
Tune to FM radio stations
Select a preset radio station
Tip:
For better reception, fully extend and
adjust the position of the antenna.
AJ3200_79_SUM_V2.0.indd 2
Store radio stations in memory
Note:
•
You can store a maximum of 10 preset radio
stations.
•
To overwrite a pre-stored radio station, store
another one with its sequence number.
Press SLEEP repeatedly to select a period (in
minutes). After the set period, the product switches
to standby mode automatically.
• To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] is displayed.
Specifications
Amplifier
Total Output Power 500 mW
Tuner (FM)
Tuning Range 87.5-108 MHz
Tuning Grid 50 KHz
Sensitivity
- Mono, 26 dB S/N Ratio <22 dBf
Total Harmonic Distortion <3%
Signal to Noise Ratio >50 dBA
General information
AC Power (power adapter) Brand name: Philips;
Model: CS12F055150FAF;
Input: 100-240 V~, 50/60 Hz,
500 mA;
Output: 5.5 V 1.5 A
USB Charging Voltage DC 5 V
USB Charging Current ≤ 1000 mA
Operation Power Consumption 9 W
Standby Power Consumption <1 W
Dimensions:
- Main Unit (W x H x D) 112 x 101 x 125 mm
Weight - Main Unit 0.4 kg
8/8/2014 3:39:26 PM