LG 15LC1RB-MG Service Manual page 15

4. After Erase Flash, Push Write Flash. Then select hex file after push Browse. Check file loading.
Push Send and wait for writing flash. (Take turns (5)~(7) )
5. Push Verify Flash and Send.(Take turns (8)~(9).) Finally, Turn off and on Main AC Power and wait for ending LED blinking.
SEDNA ISP Mode.
Push IN-START => IN-STOP => TILT => TILT at Service remocon in order then ST-BY(Red) will be blinking.
*If SET-ON LED(Green) blinks, please push TILT key once.
SEDNA Download
1. After LED checking, execute "ISP_Tool" program.
2. Push Identity and check connection message.
Check all OK!
filename.hex
- 15 -