Yamaha AVENTAGE RX-A3080 Owner's Manual page 112

■ Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at Zone2 or
Zone4. If you connect an AV amplifier, you can enjoy multichannel playback in another room
(Zone4).
Y
• To watch videos played back on a video device at Zone2 or Zone4, you need to connect the video device to the
unit with an HDMI cable (p.45).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• The "Setup" menu and "Option" menu cannot be used with Zone2 or Zone4, but browsing or play back are
possible with a network, USB or Bluetooth connection in Zone2.
HDMI OUT 3
The unit (rear) (ZONE OUT) jack
HDMI OUT
(HDCP2.2)
HDMI (HDCP2.2) NETWORK
HDMI OUT
(4 NET)
AV 4 AV 5 AV 6 AV 7 (HDCP2.2)
(8 SERVER)
3
3
(ZONE OUT) HDMI
(ZONE OUT)
TRIGGER
OUT
1
REMOTE RS-232C
12V 0.1A
IN OUT
MAX. TOTAL
2
PRE OUT
(FRONT)
1
R L
2
(REAR)
SUR. BACK SUBWOOFER CENTER FRONT
SPEAKERS
EXTRA SP2
R SURROUND BACK L R L CENTER R FRONT L
R.PRESENCE
ZONE 2/ZONE 3/F.PRESENCE
Main zone
To assign the HDMI OUT 3 (ZONE OUT) jack to Zone2 or Zone4, set "HDMI ZONE OUT Assign"
(p.145) in the "Setup" menu to "Zone2" or "Zone4".
(Example: using a TV)
HDMI input
HDMI
HDMI
Zone2 or Zone4
(Example: using an AV amplifier)
HDMI input
HDMI
HDMI
Zone4
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings
112
En