D-Link DSA-3100 Quick Installation Manual page 3

D、Power up
Connect the supplied power adapter to the DSA-3100 and power up.
E、Check the LED
The Power Indicator should be ON. The Authentication Indicator 、 Local Network Indictor and Uplink Indicator should be ON,
if the corresponding Uplink External Port was connected to a Switch(or Hub)、DSL/Cable Modem、Firewall or a Router.
Local Network LED Authentication LED
WAN LED
Power LED
Status LED Activity LED
Connection Legend
Here comes a connection legend, you have to connect your Unmanaged Network to the DSA-3100's WAN Port, then you
have to connect DSA-3100's Authentication port with your internal Switch or Hub in the Managed Network, then you
have to connect DSA-3100's Local Network port with your internal Switch or Hub in the Trusted Network. If you need to
connect DSA-3100 with administrator's PC directly, you have to use Cross Line as a connection.