Placing Calls Quickly - NEC DS1000 Quick Reference Manual

Park a call in orbit
(Cont'd)
To retrieve a call from 1.
system orbit:
2.
1. Do not hang up.
Park a call at a
co-worker's extension:
2.
•
To Page before hanging up, dial * 1
and the zone number (1-7, 0 for all call).
3. Hang up.
To retrieve a call 1. (Optional) Lift handset for privacy.
parked at a co-worker's
extension:
2.
Forward (reroute) your calls to a co-worker . . .
While at your desk or 1. (Optional) Lift handset for privacy.
out of the office, for-
ward your calls to a 2.
co-worker or Voice
3. Dial Call Forwarding type:
Mail:
= Cancel forwarding
0
= Busy/No Answer
2
= Immediate
4
= No Answer
6
4. Dial destination extension (or 0 for your
operator).
OR
4. Press
extension number to forward to Voice Mail.
5. Dial
OR
Dial
or lift handset.
+ + System Park Orbit (60-69).
+ + Extension (e.g., 300).
+ + Extension (e.g., 300).
+ .
or dial the Voice Mail master
MW
to forward all calls.
to forward just outside calls.

Placing Calls Quickly

Quickly dial co-workers and outside calls . . .
Speed Dial
To store Personal 1.
Speed Dial numbers
2. Dial Personal bin number (701-720).
(Intercom codes or
OR
outside numbers):
2. Press bin key (for bins 701-710), or
bin key (for bins 711-720).
3.
4. Dial the line number (e.g., 1 for line 1) the
system will use for your stored number.
OR
4. Dial the line group number (e.g., 90-98 for
line groups 0-8) the system will use for
your stored number.
OR
4. Press
5.
6. Enter the number to store +
•
You can enter up to 16 digits, using 0-9,
# and *. Press
FLASH
7.
Dial number.
•
Refer to Name Programming at the bot-
tom of the next page.
8.
9. Repeat from step 2 to program another
Personal Speed Dial number.
OR
9.
.
+
DIAL
.
if storing Intercom codes.
ICM
.
.
to insert a pause;
MIC
to insert a Flash.
+ Enter a name for your Speed
.
to exit.