NEC Express 5800 Series User Manual page 96

Error code Error message
Login required for this Encryption command
3060
Plaintext volumes are not allowed
3061
Rekey of the encrypted volume failed
3062
Plaintext to Ciphertext conversion of the
3063
volume failed
Instant Secure Erase failed
3064
Error changing the Controller Encryption
3065
Mode
Error - you must indicate acceptance of the
3066
End User License Agreement (EULA) using
ACCEPTEULA=YES
Unable to set the password
3067
Unable to set the Recovery question/answer An attempt to set the encryption recovery
3068
SSD Smart Path is not supported
3100
The SSD Smart Path command failed
3101
Unable to lock controller. Make sure other
3102
instances of SSA, SSACLI, or SSASCRIPTING
are not configuring this controller
Comment or clarification
command when encryption was disabled.
A login is required before the encryption command
can be attempted.
The option to create future plaintext volumes was
not selected when initially configuring the encryption
configuration.
The controller firmware returned an error when
attempting to rekey the selected logical volume.
The controller firmware returned an error when
attempting to convert the logical volume from
plaintext to ciphertext.
The controller firmware returned an error when
attempting to perform an Instant Secure Erase
operation on the selected logical volume.
The controller firmware returned an error when
attempting to change the encryption mode (on/off).
—
An attempt to set the encryption password failed.
question/answer pair failed.
—
—
—
SSA Scripting 96