Program End - AEG LAVATHERM 9DBA866C User Manual

18 www.aeg.com
Max 8kg
Cottons
Cupboard
11.7 Starting a program
To start the program, Touch the Start/
Pause button.
The appliance starts and the LED above
the button stops flashing and stays on.
On the screen you can find:
• the name of the program.
• the remaining drying time.
• the progress bar.
• the phase of a cycle (drying,
anticrease, cooling).
• the possible end time of the program.
Finished at 15:18
Cupb.
1
Cupb.
30min
Cottons
1h20min
Drying
Child lock option activation:
At any time during the drying you can
activate the child lock option.
1. Tap on the option
the option list.
2. Tap on the child lock
The option
child lock
50
h min
More
To deactivate the child lock option tap
on and hold the child lock
seconds.
11.8 Program change
To change a program:
1. Push the On/Off button to turn the
appliance off.
2. Push the On/Off button again to turn
on the appliance.
3. Set a new program.

11.9 Program end

If the drying cycle is finished, the symbol
0 appears on the display. If the
End Buzzer option is activated, the
acoustic signal sounds intermittently for
1 minute.
icon to get to
icon will change into the
icon.
Cottons
1h20min
Drying
Finished at 15:18
Clean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)
option.
icon a few
Cycle