Using The Control Panel - LG WD510AS Owner's Manual

Using the Control Panel

Units and Functions
Hot button
This button allows dispensing of hot water.
1. Press the Hot button.
2. When you press the Dispense button, hot
water will come out.
• If you wish to not use the hot water function in
order to save energy, press the Hot button for
more than 3 sec. The hot water function will be
cancelled. To use hot water again, press the
Hot button again for more than 3 sec. The hot
water function will be restored.
• In case hot water is dispensed for longer than
desired, press any button to stop dispensing.
Hot water temperature icon
This function dispenses hot water at 3 different
temperatures. (40 ºC, 75 ºC, 85 ºC)
• You can select the hot water temperature by
pressing the Hot button.
12
Ambient button
This is the function to use ambient water.
1. Press the Ambient button.
2. When you press the Dispense button, ambient
water will come out.
• In case ambient water comes out continuously,
press any button to stop.
Cold button
This button allows dispensing of cold water.
1. Press the Cold button.
2. When you press the Dispense button, cold
water will come out.
• In case cold water is dispensed for longer than
desired, press any button to stop.
Cold water temperature icon
The cold water temperature is displayed in 3
levels.
• The icon is divided into 3 levels according to
the cold water temperature status. As more
indication lamps turn on, the colder the water
becomes.
• The temperature cannot be adjusted by
discretion.
Volume button
This function dispenses hot water, cold water and
ambient water by separating the volume into 3
stages. (120 ml, 500 ml, 1000 ml)
• When you press the Hot, Ambient or Cold
button, select the desired volume and press the
Dispense button, the selected volume of the
selected water type will dispense.
• The dispensed amount of water may vary
depending on the installation environment. If
an accurate measurement is necessary, use a
separate measuring device.