Table of Contents
Advertisement
5
Plug into a suitable electrical
socket. Switch on at the mains
supply. The standby indicator
will flash.
7
Turn the variable steam control
to ' 3 '.
6
MAX
Press the temperature control
button to MAX and wait for the
control panel light to go green.
8
Iron an old cloth until no more
steam is produced and the iron
is dry.
Your iron is now ready for use.
TROUBLESHOOTING
If the iron does not operate,
try the following suggestions:
Make sure the plug is connected
and switched on the mains
Make sure the temperature
control button is set to the 1
dot setting or higher.
.
Try changing the fuse in the
mains plug.
If you still have problems then
return the unit to your nearest
store.
If water leaks from the sole
plate:
Make sure the steam rotary
knob is set to the '0' position
for dry ironing.
Make sure the temperature
control button is set to setting
3 or above for steam.
i
Information
Never pull the cord to
disconnect the plug
from the wall socket.
4
Advertisement
Table of Contents
