LG LNV7210R series Owner's Manual

OWNER'S MANUAL
High
Definition
Network
Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LNV7210 series LNV7210R series
*MFL69458110*
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this
product in the end user.
• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
Warning: Please adopt the power adapter which can meet the safety extra low voltage (SELV)
standard. And source with DC 12 V or
AC 24 V (depending on models) according to the IEC60950-1 and Limited Power Source standard.
Specification
Item LNV7210R series LNV7210 series
Image Device 6.4 mm (1/2.8 Type) CMOS
Lens Type 3 mm to 9 mm F1.2 (x3 Zoom)
Day / Night ICR (Auto / Day / Night / External / Schedule)
Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)
Minimum
B/W: 0.003 lx @ F1.2
Illumination B/W: 0 lx @ IR LED on
(1/30 sec, 50 IRE)
Camera
WDR Support
IR Distance
20 m
(LNV7210R only)
Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control,
Image
AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot,
Enhancement
SmartIR (LNV7210R only)
Compression H.264, H.264_High, MJPEG
Resolution 1920 x 1080 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)
Maximum Frame
60 fps @ 1920 x 1080
Rate
Multi-Streaming Up to 4
ROI (Region of
Smart codec (Up to 8)
Interest)
Video /
Motion detection, Tampering alarm, Face detection, Intrusion
Audio
Video Analytics detection, Crossing line, Object counting, Object removal, Object
desertion
Text Overlay Support
Audio
G.711, G.726
Compression
2-way Audio Support
Audio Detection Support
Event Trigger Video analytics, Audio detection, Alarm input
Event Notification Relay Out, Email, FTP
Event
Pre Event
Support
Buffering
Warning: Install the camera on a ceiling or wall Disposal of your old appliance
where can withstand the weight of 5 times of
1. This crossed-out
the camera including mounting bracket.
wheeled bin symbol
Caution: This installation shall be made by a
indicates that waste
qualified service person and shall conform to
electrical and electronic
all local codes.
products (WEEE)
Caution: To avoid electrical shock, do not
should be disposed
open the cabinet. Refer servicing to qualified
of separately from the
personnel only.
municipal waste stream.
Caution: The apparatus shall not be exposed
2. Old electrical products can contain
to water (dripping or splashing) and no objects
hazardous substances so correct disposal
filled with liquids, such as vases, shall be placed
of your old appliance will help prevent
on the apparatus.
potential negative consequences for the
Caution: Make sure the power supply voltage
environment and human health. Your old
is correct before using the camera.
appliance may contain reusable parts that
Caution: Do not drop the camera or subject it
could be used to repair other products,
to physical shock.
and other valuable materials that can be
Caution: The sensor may be burned out by
recycled to conserve limited resources.
a laser beam, so when any laser equipment is
3. You can take your appliance either to the
being used, make sure that the surface of the
shop where you purchased the product,
sensor not be exposed to the laser beam.
or contact your local government waste
Caution: While shipping, the camera should be
office for details of your nearest authorised
packed in its original packing.
WEEE collection point. For the most up to
Caution: It is permitted to use ancillary
date information for your country please
equipment (e.g. A UPS) to prevent the damage
see www.lg.com/global/recycling
from mains supply voltage reductions.
Note:
EuSP Ltd.
Herald Way Pegasus Business Park
Please make sure the product is installed
Castle Donington, DE74 2TZ United Kingdom
appropriate places where secured from flood,
such as under the eaves, to operate properly.
This product is certified as IP66 standard.
However, if there is any flood concerns, it
is highly recommended to use an outdoor
Housing. When you install the camera inside
an outdoor Housing, please use one of the
following methods:
1. Remove the front glass of Housing before
installing the camera.
2. To keep the front glass of Housing, remove
the front cover, and then put the camera
close to the front glass.
Analog Out BNC out
Audio In / Out 1 / 1
Interface
Alarm In / Out 1 In / 1 Out
SD Slot micro SD (Up to 32 GB)
Ethernet RJ-45 10 / 100 BASE-T
Security Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X
Open Protocol ONVIF 2.2 Profile S, PSIA 1.1
IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP,
QoS, UPnP
Network
Protocol
IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)
Integrated LG Ipsolute VMS Suite / Mobile application (iPhone, iPad,
Software Android)
Connections Up to 20
Power Source DC 12 V, PoE
Maximum Power
8.7 W (DC 12 V), 10.4 W (PoE 48 V)
Consumption
Maximum Input
730 mA (DC 12 V), 280 mA (PoE)
Current
Operation
General
Temperature / -10 ºC to 50 ºC / 0 % RH to 80 % RH
Humidity
Protection IK10, IP66
Dimension
140 mm x 122 mm
(Ø x H)
Weight 957 g 950 g
Note that design and specification of this unit may change from the manual as quality and
improvement without prior notice.
Components
Camera, CD (Software and Owner's Manual), Installation Manual, Test monitor cable, Wrench,
Screws (4 EA), Installation sticker, Camera mounting bracket
Important Safety
13. Unplug this apparatus during lightning
storms or when unused for long periods
Instructions
of time.
14. Refer all servicing to qualified service
1. Read these instructions.
personnel. Servicing is required when
2. Keep these instructions.
the apparatus has been damaged in any
3. Heed all warnings.
way, such as power-supply cord or plug
4. Follow all instructions.
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
5. Do not use this apparatus near water.
apparatus has been exposed to rain or
6. Clean only with dry cloth.
moisture, does not operate normally, or
7. Do not block any ventilation openings.
has been dropped.
Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
Handling of the unit Operating and storage
location
Be careful not to spill water or other liquids on
the unit. Be cautious not to get combustible or
Avoid viewing a very bright object (such as
metallic material inside the body. If used with
light fittings) during an extended period. Avoid
foreign matter inside, the camera is liable to fail
operating or storing the unit in the following
or to get cause of fire or electric shock.
locations.
• Remove dust or dirt on the surface of the
• Extremely hot or cold places (operating
lens with a blower.
temperature -10 °C to 50 °C, however, we
• Use a soft and lint-free, dry cloth(such as
recommend that the unit be used within a
glass cleaner) to clean the body. If it is
temperature range of 0 °C to 45 °C)
very dirty, use a cloth dampened with a
small quantity of neutral detergent then • Damp or dust place
wipe dry.
• Places exposed to rain
• Avoid the use of volatile solvents such
• Places subject to strong vibration
as thinners, alcohol, benzene and
• Close to generators of powerful
insecticides.
electromagnetic radiation such as radio or
They may damage the surface finish and/
TV transmitters.
or impair the operation of the camera.
• Do not use the camera in such place
• This camera is designed for mounting on
where rapid temperature fluctuation by
the ceiling or wall. If you install this camera
switching an air conditioner on and off.
upside down, it may cause malfunction.