LG KBB-700 User Manual

Product Overview
LED indicator
Key pad
Rolling magnets
User Guide
Stand
KBB-700
Battery cover
Rev 4.0 US
All rights reserved.
LG Electronics Inc., 2015
Note: Please read all information
carefully prior to using the
KBB-700 in order to prevent
product damage and to enjoy the
best performance.
www.lg.com
1
Using the Product
Install the battery
- When using the keyboard for the first time, open the battery cover at the
top center of the keyboard by pressing your fingernail against the slit on
the battery cover.
- Remove the protective film between the AAA battery included in the keyboard
and the positive (+) and negative (-) poles. Insert the battery in the correct
direction, and then close the cover.
Note: Only use batteries approved by the manufacturer.
Position a device
- Open out the stand by pressing your fingernail against the slits on the top left
and right of the keyboard, and then place your device on the stand.
2
4. When pairing is complete, the LED indicator changes to blue for 3 seconds
and then dims.
* If you intend to pair with two devices, you will need to pair with the second device
before you pair with the primary device. To pair with the second device, do the
following instructions before Step 2 listed above. Press the "Fn + D (Shift)" keys
Power off on the keyboard to enter pairing standby mode for the second device. Verify that
the LED color changes from blue to purple.
When you power off the product, be sure to close it in the direction of the arrows.
* Failure to follow the instructions in this manual may result in fault or malfunction
and the product may not power off properly.
Pair the keyboard with a device running Windows® 7 or 8
Some keys may not be supported by Windows OS.
1. Power on the keyboard by opening it completely.
How to use keys
2*. Press and hold down the "Fn + B (Pair)" keys for at least 2 seconds.
- When in pairing mode, the blue LED indicator blinks at 1-second intervals for
To enter characters (symbols or numbers) marked with the same color as the
3. Select Control Panel > Add devices and printers > Add a device.
Fn key, press the relevant key combination while also pressing the Fn key.
4. Select "LG-Rolly Keyboard". Follow the onscreen instructions to complete the
pairing.
Example 1: A key containing three characters (a letter, a symbol, and a number)
5. When pairing is complete, the LED indicator changes to blue for 3 seconds
and then dims.
Activity Key input
q Q
* If you intend to pair with two devices, you will need to pair with the second device
Q Shift + Q
before you pair with the primary device. To pair with the second device, do the
following instructions before Step 2 listed above. Press the "Fn + D (Shift)" keys
Fn + Q
on the keyboard to enter pairing standby mode for the second device. Verify that
Fn + Shift + Q
the LED color changes from blue to purple.
Example 2: A key containing four characters (symbols)
y Once the keyboard has been paired with an Android or Windows device, the
Activity Key input
] ]
y If you pair a new device when the keyboard has already been paired with two
} Shift + ]
Fn + ]
Fn + Shift + ]
3
LED Indicator
Hot keys
Volume up Fn + w
The LED indicator will light up according to the tables below.
Volume down Fn + s
To check the battery level, press the "Fn + Space" keys.
Rewind Fn + a
Fast forward Fn + d Battery level
Play / Pause Fn + Enter
Search Fn + S
iOS: Fn + X, Cmd + X
Text cut
Android/Windows: Ctrl + X
iOS: Fn + C, Cmd + C
The LED blinks when the battery level is low. When the battery runs low or is fully
Text copy
Android/Windows: Ctrl + C
discharged, replace it with a new AAA battery.
iOS: Fn + V, Cmd + V
Text paste
Android/Windows: Ctrl + V
Start key (Windows) Cmd
Precautions
iOS 8 or earlier: Earth mark( ) or Cmd + Space
Language select iOS 9 or later: Ctrl + Space
Android: Shift + Space
y Only use batteries approved by the manufacturer.
■
Home (Android/iOS)
y There may be compatibility issues when connected to some products.
Fn + ■
Delete
y Functions may vary depending on the device and OS.
y The stand may not hold a particular device depending on the type and
Pairing the Keyboard with a Device
y Do not use the product in a damp place such as a laundry room or bathroom.
This product can be connected and used with up to two Bluetooth ® devices.
Set up your Bluetooth device by following the instructions below:
y Always use the product in a clean, dust-free environment.
Pair the keyboard with an Android™ OS or iOS device
y Set up the product on a stable base with no risk of falling.
1. Power on the keyboard by opening it completely.
y Do not place heavy objects on the product.
2*. Press and hold down the "Fn + B (Pair)" keys for at least 2 seconds.
- When in pairing mode, the blue LED indicator blinks at 1-second intervals for
2 minutes.
y Spilling water, coffee, juice, or any other liquid on the keyboard may result in
3. Search for the keyboard on the primary device you want to pair with, or select
Rolly Keyboard among the searched devices.
- Some devices may require you to enter a PIN. Press and hold the Fn key while
entering the PIN.
4
y Do not place glasses or containers containing chemicals or water on or
near the product.
Getting water inside the product may cause a fire.
y Do not place a lit candle, cigarette, etc. on the product.
This may result in a fire.
y The underside of the product may become hot while in use. Avoid touching it
or using the product on your lap.
y After having the product serviced, ask a technician to perform a safety check on it.
Using the product without a post-servicing safety check may result in fire.
y Keep the product away from heating appliances.
Being too close to a heat source may cause the product to deform or to be set
on fire.
y Do not leave the product unattended in a vehicle.
This may result in explosion of the battery or fire due to high temperature.
y When not using the product for a long period of time; turn the power off to
2 minutes. prevent unnecessary use of the battery power.
y Always use replacement parts approved by LG Electronics Inc™.
Otherwise this may result in fire or damage to the product.
y Do not disassemble or modify the product.
Doing so can void the warranty, even within the warranty period.
y Be careful when touching a part or device.
Incorrect handling may result in damage to the product.
y When removing a part or device from the product, be careful not to drop it.
The dropped part or device may cause personal injury or damage to the product.
y The magnets and small parts of the product are a swallowing hazard for children.
y If you have a medical device implanted, consult your doctor before using the product.
y The fabric used between the key rows may not withstand excessive pulling and
twisting and should be handled with care.
pairing process will not need to be repeated to reconnect to previously paired
y The magnets used in the product may damage magnetic cards or affect the
devices.
operation of pacemakers, etc.
y When on board an aircraft, always follow the crew's instructions.
devices, the last paired device is unpaired.
Incorrect use of the product on the airplane may result in aviation accidents.
y Keep the product away from direct sunlight.
Direct sunlight may cause deformation of the product or fire due to the
increase in temperature.
y Do not store the product in a confined space such as a bag for a long period
of time, or repeatedly, with the power on.
This may result in a fire due to the battery overheating.
5
Battery precautions
.
Warning:
Follow the instructions below to ensure safe and efficient use of the battery.
y Only use batteries approved by the manufacturer.
y Keep the battery out of reach of pets and children.
Status Action y When visibly swollen or corroded, the battery may be hazardous.
Please contact the manufacturer or seller.
Battery level is at 15% or above Blinks blue five times
y Keep the battery away from heat sources. (Never place in a microwave oven.)
Battery level is at 5 to 15% Blinks red five times
y Do not keep the product in a confined space for a long time with the power on.
y Ensure the battery connectors do not come into contact with metal objects
such as necklaces, coins, keys, and watches.
y Never disassemble, modify, compress, or pierce the battery. If the battery has
been severely impacted, discard and replace it immediately.
y Do not drop the battery from a height or subject it to impact or shock.
y Store the battery at room temperature (0ºC to 50ºC) and never expose it to
temperatures of 60ºC or above.
y Do not touch the battery with wet hands or allow it to come into contact with
moisture.
y There is a risk of explosion if the battery is not replaced correctly. Dispose of
LG Electronics does not guarantee compatibility with all peripherals.
used battery according to the manufacturer's instructions.
y For safety purposes, be sure to read the user guide before using the product.
y Always store the battery in a protective battery case to prevent external shock.
orientation of the device. The angle may vary depending on the device.
This may result in malfunction or electric shock. Always use the product within the
recommended temperature and humidity range of 10 to 35ºC and 20 to 80% RH.
Otherwise this may cause a malfunction.
Otherwise this may result in damage to the product or personal injury.
Failure to follow this precaution may result in malfunction. Such objects may fall
and cause personal injury or damage to the product.
damage to the product or malfunction.
6
WARNING: This product contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm. Call (800) 243-0000
for more information. Wash hands after handling.
Part 15.19 statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Part 15.21 statement
Changes or modifications not expressly approved by the manufacturer
(or party responsible) for compliance could void the user's authority to
operate the equipment.
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Bluetooth ® is a registered trademark of Bluetooth SIG, Inc. worldwide.
7
Troubleshooting
If the keyboard does not operate following installation or is not
Batteries can overheat, explode, and catch fire.
recognized.
y Make sure the batteries are not too weak.
y To determine whether the keyboard or the paired device is causing the
problem, test the keyboard by pairing it with another device if possible; or test
another keyboard with your currently paired device.
If you are still unable to solve the problem, please contact your point of sale or
your dealer.
If you need to exchange the keyboard, please note that you must return it to your
dealer in its original packaging with proof of purchase (receipt); keep your receipt
in a safe place after purchase.
Standard
Frequency range
Operating temperature
8
9
Bluetooth 3.0
2402 ~ 2480 MHz
10°C to 40°C
10