Using The Web Service - LG V5000 Owner's Manual

Using the Web Service

You can perform the same configuration from the web interface that is available from the unit. The web interface contains additional features
that cannot be configured on the unit. You can also update the system, upload certification, import or export address book in the web service.
Login the web service
1. Run the web browser.
The recommended browser is Internet Explorer with Windows.
2. Enter "http://" and the IP address of the VCS in the Address Box.
You can use the Host Name that you entered in the DDNS setup menu of the VCS.
3. Press ENTER on the keyboard and then the LG VCS Web service login page will be displayed.
4. Select the ID and enter the password. The default password is "lge123" for Administrator and "lge456" for User 01 to User 04.
NOTE
• Up to 5 users can connect to the Web Service.
• When you close web service, you should click logout button on the right up side of web page. If you log in and find the below pop-up
message, click OK button and try to log in again after 30 seconds, you can log in.
• You can change the password on the Web Service. Click the ID where is top right of the main screen. The [Change ID & P/W] window will
be displayed. Enter the [Current Password], the [New Password] and the [Retype New Password] and then Click OK to save.
Operation 59
4