Advertisement
Quick Links
QUICK INSTALLATION GUIDE
DWR-910 4G LTE USB ROUTER
ENGLISH
DWR-910 4G LTE USB ROUTER OVERVIEW
Storage Cap
USB Plug
INSERT SIM AND MICRO SD CARDS
1. Push and slide off the rear cover of the DWR-910 to access the SIM and mi-
croSD card slots.
2. Insert the SIM and microSD card into their respective card slots according to
the orientation of the icon on the device. Ensure that the gold contacts on the SIM
and microSD card are facing downward.
CONNECT THE USB
1. Remove the storage cap and connect the dongle's USB plug to a USB port on
your computer. Ensure the plug is firmly connected.
LED STATUS
Indicator
Color
4G
Green
Blue
Purple
Red
Wi-Fi
Green
ESTABLISH A NETWORK CONNECTION
You can plug the DWR-910 directly into your computer's USB port, or connect a
wireless device to it via Wi-Fi, to access the Internet.
Modem Mode (USB Connection)
Plugging the dongle into your computer's USB port will allow you to access the
Internet and web UI. The device will automatically install a driver when used for
the first time.
4G LED Wi-Fi LED
Signal
Solid: Connecting with LTE network
Blinking: Connected to LTE network
Solid: Connecting with 3G network
Blinking: Connected to 3G network
Solid: Connecting with 2G network
Blinking: Connected to 2G network
Blinking: No Service/Device Error
Solid: Wi-Fi is connected
Blinking: Wi-Fi is connected and data is
being transmitted
Off: Wi-Fi is turned off
Router Mode (Wi-Fi connection)
Wi-Fi
1. Ensure that the DWR-910 is connected to a powered USB port and the LED
labeled Wi-Fi is green.
2. Search for the Wi-Fi signal broadcast by the DWR-910 using another client
device such as a computer, mobile phone, tablet PC, or game console. The
device's network name (SSID) is dlink_DWR-910_xxxx where xxxx is the
last four digits of the DWR-910's MAC address. You can find the default
SSID and Wi-Fi password on the label of the DWR-910.
3. The default settings will allow the device to automatically connect to the
Internet.
Note: If you encounter a WAN connection failure, please login to the web UI
and configure the APN manually. For more information contact your Internet
service provider.
WEB UI ACCESS
The web UI allows you to configure the DWR-910's advanced settings. To
access the web UI:
1. Connect the DWR-910 4G LTE USB Router to your computer.
2. Enter 192.168.0.1 into your web browser to access the web UI. The web UI
login screen will then appear.
3. Enter admin as the account name and leave the password area blank. Then
press Login to access and configure the DWR-910's settings.
SETUP WIZARD
1. Log into the web UI.
2. Click the Wizard icon on the main page of the web UI.
3. Complete the setup wizard to configure the DWR-910's settings.
TROUBLESHOOTING
Why am I unable to connect to my mobile Internet service?
Check to make sure the SIM card is installed properly, and that your SIM card
has 4G data service. Also, make sure that antivirus software is not blocking your
connection.
I'm having trouble using the DWR-910 on my Apple computer.
Due to how OSX handles USB ports, if you connect the DWR-910 to a different
USB port than you originally used, you will need to reinstall the drivers.
TECHNICAL SUPPORT
United Kingdom (Mon-Fri) website: http://dlink.com
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-
02.00pm)
Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am-
05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri)
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak times
Advertisement
