6. Function settings
Set power supply switching, external static pressure setting, and damper system switching. Setting must be done with
the power OFF.
External static pressure must be at the rated air volume when all the damper is full open.
6-1. Damper System switch setting
■PEAD-RP60,71,100,125,140JA(L)
0-10V analog input is valid by switching SW1-1 ON.
With Damper System
SW1-1
ON
SWE
SW1
SW2
Without Damper System
OFF
20
■PEFY-P63,71,80,100,125,140VMA(L)-E
0-10V analog input is valid by switching SW3-6 ON.
With Damper System
SW3-6
ON
SW2
SW4
SW3
Without Damper System
OFF
(Initial setting OFF)
SWE