Honeywell Galaxy TouchCenter Plus Installer Manual page 12

Setup a WIFI (WLAN) Connection
On the screen, add a WIFI network connection as follows:
IP Setup
ICON
1. On the Home
and then enter an authorised code.
2. Press the
3. Press the
4. Do one of the following:
a) Use the scroll bar to locate a network
from the list of WiFi Networks to connect
to and highlight that field. If your router
is not listed press the
b) If your router is not listed, even after
refreshing the list, scroll to the bottom of
the list and select
Highlight each field to enter the required
information for SSID, Security Mode, and
Passphrase / Shared Key on the
Entry Keyboard
5. Press the
changing the port number resets the keypad.
Initial Setup (cont'd)
ACTION
screen, press the Setup
icon.
IP Setup
button.
WIFI ON
icon.
Refresh
.
Add Network
Data
and press .
GO
icon. Pressing when
Save Save
icon,
A pop-up window displays:
This will switch off LAN Network, do you want to
continue? Yes or No.
Use the Data Entry Keyboard to enter the required
information.

Press the up arrow key to switch to capital
letters.

Press the Space key to add a space between
characters.

Press the x key to delete/backspace.

Press the ABC/.?123/Åå key to switch between
numerals and symbols/characters.
A pop-up window displays:
Success
WIFI Network Saved
12
NOTES