Table of Contents
Advertisement
12
www.electrolux.com
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
7.3 Setting the DURATION
function
1. Set a heating function.
2. Press
starts to flash.
3. Press
and then the hours. Press
confirm.
When the set Duration time ends the
signal sounds for 2 minutes.
time setting flash in the display. The
oven turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.4 Setting the END function
1. Set a heating function.
2. Press
starts to flash.
3. Press
then the minutes. Press
confirm.
At the set End time the signal sounds for
2 minutes.
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.5 Setting the TIME DELAY
function
1. Set a heating function.
or
to set the current
to confirm or the set time of
flashes in the display.
again and again until
or
to set the minutes
again and again until
or
to set the hours and
to
and time setting flash in
2. Press
starts to flash.
3. Press
and then the hours for DURATION
time. Press
The display shows flashing
4. Press
then the minutes for END time. Press
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds for
2 minutes.
the display. The oven turns off.
5. Press any button or open the oven
to
door to stop the signal.
6. Turn the knob for the heating
functions to the off position.
and
7.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
"00" flash in the display.
2. Press
and than the minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any button
to stop the signal.
7.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold
up again.
again and again until
or
to set the minutes
to confirm.
or
to set the hours and
to confirm. The display shows
and the set temperature.
and time setting flash in
again and again until
or
to set the seconds
flash in the display.
and
. The timer starts to count
.
and
Advertisement
Table of Contents
