Advertisement
Quick Links
SHAW HD BOX
INSTALLATION INSTRUCTIONS
(Approx. Hardware Setup Time: 10-15 Minutes)
|
STEP 1
DO YOU HAVE EVERYTHING?
The following components are included in the package that your HD box came in:
Cable Cord (Coax)
Shaw Remote
|
STEP 2
TIME TO HOOK UP YOUR NEW HARDWARE.
A. Your serial number, "Host SN," is located on the back
of the HD box (next to the number 3) and starts with
the letter "M". Alternatively, you can nd the serial
number on the white sticker labeled "S/N" on the HD
box packaging.
Before you hook up your HD box, write your serial
number below. You will need it when you contact us to
activate your new hardware.
Serial Number:
C. Screw one end of the
included white cable cord
(with silver ends) in to your
wall cable outlet and the
other end in to CABLE IN
on the back of the HD box.
For an optimal viewing
experience, we recommend
using the included cable
cord instead of any others
that you might have around.
Power Pack
Wall Outlet
Cable Out
HDMI Cable
Motorola HD Box
B. Find a location to put your new hardware that will allow
it to breathe.
Cable In
IR Receiver + Tether Cord
(Optional Use)
Advertisement
Related Manuals for Motorola DCX3200R
Summary of Contents for Motorola DCX3200R
-
Page 1: Installation Instructions
HDMI Cable IR Receiver + Tether Cord (Optional Use) Shaw Remote Motorola HD Box STEP 2 TIME TO HOOK UP YOUR NEW HARDWARE. A. Your serial number, “Host SN,” is located on the back B. Find a location to put your new hardware that will allow of the HD box (next to the number 3) and starts with it to breathe. - Page 2 D. Connect the included HDMI cable (black cable with E. Connect the included power adapter from the wall at gold ends) from the HD box to your TV. Both video power outlet to the HD box. and audio travel through HDMI cable. Note the input you plug your HDMI cable in to on the back of your TV (i.e.