Switch Panel Displays - Hitachi BL 36200 Safety Instructions & Instruction Manual

4. Plug the adapter into the cordless power tool. (Fig. 12)
Insert the adapter fi rmly until it clicks into place in the same way as the battery.
5. Switch on the main switch and power switch to the Back Pack Power Supply.
Switch on the Back Pack Power Supply's main switch. Then switch on the power switch on
the switch panel to illuminate the power indicator and supply DC 36V of electrical current to
the cordless power tool connected.
6. Switch on the cordless power tool and begin work.
Carry out the required work in accordance with the details provided in the instruction
manual for the cordless power tool in use.
7. Check the remaining capacity of the battery.
Press the remaining battery capacity switch on the switch panel periodically and check the
indicator to avoid the power tool from stopping midway through the work in hand.
8. Terminating electricity supply.
Switch off the cordless power tool in use, and then switch off the power switch and main
switch to the Back Pack Power Supply.
AUTOMATIC POWER OFF FUNCTION (POWER SWITCH ON THE SWITCH PANEL)
To prevent the wasteful use of the Back Pack Power Supply, the power will be automatically
switched off after fi ve hours elapses without it being used with the power switch on the
switch panel left in the on position.
If the main switch is left on, check to confi rm that the power to the cordless power tool or
USB device being used is switched off before pressing the power switch on the switch
panel to resume work.
SWITCH PANEL DISPLAYS (FIG. 13)
Power Switch
The power indicator will be illuminated in green and DC
36V of electrical current will be supplied to the adapter
when the power switch is pressed with the main switch to
the Back Pack Power Supply at the on position.
Remaining Battery Capacity Switch
Press the remaining capacity switch to discover the
remaining capacity with the indicator that is illuminated in
red through fi ve stages.
If the indicator on the right blinks, it means the battery has
run out and output has ceased. Recharge the battery in
this event.
Warning Indicator
Notifi es the user that output has been halted owing to a
problem arising.
(Continual illumination in red)
Carrying out work that constantly requires large amounts of electrical current and
that involves continual use under harsh conditions, such as high-temperature
environments, will cause the temperature inside the Back Pack Power Supply to
rise. Output will be halted in this event to prevent high-temperature damage.
Wait until the Back Pack Power Supply cools down before resuming work.
English
Power
Warning
Switch switch
lamp
panel
Remaining Remaining
capacity capacity
display switch indicator
Fig. 13
15