Adjusting The Display; Turn The Power On - Brother AIRScouter WD-350B Installation And Operation Manual

How to wear the AiRScouter
1.
Place the head band onto the head as shown. The band should be
positioned just above the forehead.
Note
If the head band feels loose or starts to slip down the forehead, attach
the rear band and use it to tighten the fit on your head.
If you wear glasses
2.
To secure the head display cable to your clothing, use the cable clip.

Adjusting the display

Turn the power on

Press the power button to turn the AiRScouter on. (The LED will turn
orange.)
Adjust the position of the Head Display
1.
Loosen the ball joints by turning the dials on either end of the flexible
arm counter-clockwise.
2.
Adjust the position and angle of the head display so that it is easy
to view.
3.
Tighten the ball joints by turning the dials on either end of the flexible
arm clockwise, to fix the head display in place.
Note
• If the ball joints become loose after adjusting the position of the head
display, turn the dials on either end of the flexible arm clockwise to fix
the head display in place.
• If you cannot see the full image after adjusting the flexible arm, you
may have to adjust the position of the head band to bring the display
into your field of view.
Adjust the focus of the image
Turn the focus adjustment dial to
either side until the image on the
head display is in focus. The focal
length of the optics can be changed
from 30 cm to infinity.
Rotation of the image
The head display automatically adjusts the rotation of the image
(for example, when switching the display from left-eyed viewing to
right-eyed viewing) to ensure that its orientation is correct. To disable
this function (for example, while performing a task that involves
frequently changing the orientation of your head), enable the Key Lock
function.