Scan Tool Data; Scan Tool Data Definitions - Suzuki Grand Vitara Service Manual

3C-22 Transfer: Motor-Shift Type (Transfer with Shift Actuator)

Scan Tool Data

Scan Tool Data
Vehicle speed At vehicle stop
Engine speed At engine idle speed
Transfer shifted to 4H position
Transfer being shifted between 4H-lock and 4H position
Transfer shifted to 4H-lock position
Actuator Pos Sen Transfer being shifted between 4H and N position
Transfer shifted to 4L-lock position
Transfer being shifted between N and 4L-lock position
Transfer shifted to N position
Transfer shifted to 4H position
Transfer shifted to 4H-lock position
Actuator motor Pos
Transfer shifted to 4L-lock position
Transfer shifted to N position
Battery voltage Ignition switch ON and engine stop
Transfer shifted to 4L-lock or N position
4L/N switch
Transfer shifted to 4H or 4H-lock position
Transfer shifted to 4H or N position
Center diff lock SW
Transfer shifted to 4H-lock or 4L-lock position
A/T shifted to "N" range
N range signal (AT)
A/T shifted to other than "N" range
Clutch pedal depressed
CPP switch (MT)
Clutch pedal released
Transfer switch selected to N position
Mode switch 1
Transfer switch selected to 4H, 4H-lock or 4L-lock position
Transfer switch selected to 4H, 4H-lock or N position
Mode switch 2
Transfer switch selected to 4L-lock position
Transfer switch selected to 4H-lock or 4L-lock position
Mode switch 3
Transfer switch selected to 4H or N position
Buzzer not being sound
Transfer shifted to N Position
Warning buzzer
Transfer shifted to disagreement of transfer switch and transfer
position
ABS operating
ABS active
ABS not operating

Scan Tool Data Definitions

Vehicle Speed (KM/H, MPH):
This parameter indicates vehicle speed calculated
by 4WD control module.
Engine Speed (RPM):
This parameter indicates engine revolution
calculated by 4WD control module.
Actuator Pos Sen (Transfer shift actuator motor
position switch) (4H / 4H-lock / 4L-lock / N / 4H-
lock-4H / 4H-N / N-4L-lock):
This parameter indicates transfer shift actuator
motor position switch status detected by 4WD
control module.
Actuator motor Pos (Transfer shift actuator motor
position) (4H / 4H-lock / 4L-lock / N):
This parameter indicates transfer shift actuator
motor position detected by 4WD control module
using transfer shift actuator motor position.
www.CarGarage.ir
Vehicle Condition
Battery voltage (V):
S5JB0A3314011
This parameter indicates battery voltage detected by
4WD control module.
4L / N switch (ON / OFF):
This parameter indicates 4L / N switch status
detected by 4WD control module.
Center diff lock Sw (ON / OFF):
This parameter indicates center differential lock
switch status detected by 4WD control module.
N range signal (AT) (ON / OFF):
This parameter indicates A/T shift position ("N" range
or not) detected by 4WD control module.
CPP switch (Clutch pedal position switch) (MT) (ON /
OFF):
This parameter indicates clutch pedal position switch
status detected by 4WD control module using CPP
switch.
Mode switch 1 (Transfer switch) (ON / OFF):
ON: Transfer switch to N position.
OFF: Transfer switch to other than N position.
www.CarGarage.ir
S5JB0A3314009
Normal Condition /
Reference Value
0 km/h, 0 mph
Engine idle speed is display
4H
4H-lock – 4H
4H-lock
4H – N
4L-lock
N – 4L-lock
N
4H
4H-lock
4L-lock
N
10 – 14 V
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
OFF
N Pos
Error
ON
OFF