Toshiba D-VR4SU Service Manual page 50

1-5: POWER PCB (Refer to Fig. 1-5)
Remove the 2 screws 1.
1.
2. Disconnect the following connector: (CP506).
3. Remove the Fan Motor in the direction of arrow (A).
Remove the 3 screws 2.
4.
5. Disconnect the following connector: (CP1702).
6. Remove the Power PCB in the direction of arrow (B).
1-6: VCR DECK (Refer to Fig. 1-6)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
Unlock the 2 supports 1 and remove the Top Holder.
1.
Remove the screw 2.
2.
3. Remove the FE Head.
4. Move the Cassette Holder Ass'y to the back side.
Remove the 3 screws 3.
5.
6. Disconnect the following connectors:
(CP101, CP102, CP3001).
7. Remove the AC Head Cover and VCR Deck in the
direction of arrow.
DISASSEMBLY INSTRUCTIONS
2
2
Power PCB
2
CP506
Fan Motor
(B)
CP1702
(A)
1
1
Bottom Plate
VCR Deck
1-7: VCR PCB (Refer to Fig. 1-7)
Remove the screw 1.
1.
Remove the screw 2.
2.
Fig. 1-5
Remove the 7 screws 3.
3.
4. Remove the VCR PCB in the direction of arrow.
B1-2
3
3
2
3
FE Head
2
Bottom Plate
AC Head Cover
Top Holder
1
1
CP101
CP102
CP3001
Fig. 1-6
VCR PCB
1
3
3
3
3
3
3
3
Fig. 1-7
D-VR4SU/D-VR4SC