Drive Data - ABB ACS800 User Manual

System data
Liquid density, (lb/ft³)
Enter the density of the liquid at the pump inlet in pounds per cubic feet. The
density of water is 62.4 lb/ft³ (default value).
Static head (ft)
Motor Data
Nominal Power, (Hp)

Drive Data

Nominal Efficiency, 
Based on motor power and voltage, PumpSave suggests appropriate drive type
to be used. It is shown on the right side of the "Drive Data" box. If the motor
voltage is between 200 and 690 V, PumpSave recommends a low voltage AC
drive type available in the US markets.
(%)
m
11