Table of Contents
Advertisement
9.
Select individual Genius I/O devices from the right-hand panel of Figure 15 and then drop
them into the appropriate location row on the left-hand side, resulting in Figure 16.
10. Special consideration needs to be given to the configuration of a Series 90-70 Remote I/O
Scanner (BEM733) device on the Genius Bus, since this device is capable of controlling a
rack filled with I/O modules, each of which needs to be suitably configured.
a.
b.
GFK-2892B
Figure 16: Populating the Genius IO Devices to be Controlled by the Genius Gateway
Add the BEM733 to the Genius Bus configuration as described above.
Drill down into the BEM733. A display of rack I/O will be presented (Figure 17).
Figure 17: Populating Slots in S90-70 Rack Controlled by Remote I/O Scanner (BEM733)
PACSystems RX3i Genius Communications Gateway User Manual
Chapter 3. Configuration
Public 31
Advertisement
Table of Contents
