Transfer To An Idle Station; Call Transfer With Camp-On - Toshiba Strata DK16 User Manual

STRATA DK ADD-ON MODULE / DSS CONSOLE
To Transfer an outside call to an
idle station:
1. Press the DSS button
corresponding to the station to
be called.
2. Announce the call. You do not
have to press any other
button.
3. Hang up to transfer the call.
To transfer an outside call to a
busy station:
1. Press the DSS button
corresponding to the busy
station to be called.

TRANSFER TO AN IDLE STATION

You can transfer outside calls to an idle station.
The outside line is placed on hold automatically. The Line LED will flash
green at double the on-hold rate, and the DSS LED will flash green.
You will hear a single ring tone. (If using the Tone signaling mode, you
will hear successive ring tones.)
With Tone signaling, you would have to wait for the called station to
answer before announcing the call.
The outside line will ring the called station when you hang up. While the
called station is ringing, the DSS LED will become steady red, and the
Line LED will flash green at the on-hold rate.
When the called station answers the call, the DSS LED will stay steady
red, and the Line LED will become steady red.
NOTE:
If the called station does not answer your call in Step 2, you can still
transfer the call by hanging up. If the station does not answer before a
period set in system programming, the outside line will recall you.

CALL TRANSFER WITH CAMP-ON

You can transfer an outside call to a busy station. Even though the LED
of the DSS button associated with the busy station will be red before you
try to transfer the call, use the DSS button to transfer the call.
You will hear a busy tone. The outside line will be placed on hold
automatically. The Line LED will flash green at double the on-hold rate,
and the DSS LED will remain steady red.
ADD-ON MODULE
1-3