Advertisement
Quick Links
This guide explains the installation, configuration and operation of the XN120 2OPBOX.
Further information will be supplied with any optional equipment that you have purchased.
Please keep all information supplied for future reference.
Regulatory Notice.
Refer to the Getting Started Guide (991409-5) supplied with the XN120 Main Unit for the Declaration
of Conformity related to the product.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
XN120
2OPBOX Guide
Rev 1.1 February 2005
991419-5
Advertisement
Related Manuals for NEC XN120 2OPBOX
Summary of Contents for NEC XN120 2OPBOX
- Page 1 This guide explains the installation, configuration and operation of the XN120 2OPBOX. Further information will be supplied with any optional equipment that you have purchased. Please keep all information supplied for future reference. Regulatory Notice. Refer to the Getting Started Guide (991409-5) supplied with the XN120 Main Unit for the Declaration of Conformity related to the product.
-
Page 2: Table Of Contents
What is the 2OPBOX? ............................3 Installation Procedure ............................3 1- Unpack the 2OPBOX ............................3 2- Fitting the 2OPBOX ............................4 3- Install the Option Cards ...........................6 4- Connect the Power & System Start Up ......................7 5- Test the 2OPBOX..............................8 Configure the XN120 ............................8 XN120 2OPBOX Guide... -
Page 3: What Is The 2Opbox
1- Unpack the 2OPBOX The 2OPBOX is supplied with 6 screws to fix the unit to the XN120 main/expansion cabinet. Additional Items Required: Cross head screwdriver. Small cutters/pliers. Optional Items The 2OPBOX can have BRI cards or VoIP cards installed. XN120 2OPBOX Guide... -
Page 4: 2- Fitting The 2Opbox
3 breakouts on the right side of the XN120 base unit. You will need to remove the lid of the XN120 first. Remove the 3 breakouts on the right side of the XN120 unit XN120 2OPBOX Guide... - Page 5 XN120 cabinet XN120 2OPBOX Secure the 2OPBOX using the screws supplied. There are two screws with self 2OPBOX 2 self tapping screws tapping thread and four with a machined thread. 4 machine screws XN120 2OPBOX Guide...
-
Page 6: 3- Install The Option Cards
Fit the option card into the guides and push firmly onto the connector. Secure the card to the ETH plate at the front edge of the 2OPBOX. Secure to the ETH plate. XN120 2OPBOX Guide... -
Page 7: 4- Connect The Power & System Start Up
Getting Started Guide supplied with the XN120 for further information. The BRI/VOIP card(s) will be Refer to the instructions supplied with the option card for configuration automatically configured. details. XN120 2OPBOX Guide... -
Page 8: 5- Test The 2Opbox
2OPBOX screws. and lower into place. Configure the XN120 There is no configuration related to the 2OPBOX, the cards within it require configuration. Refer to the instructions supplied with either the BRIU or VOIPU card. XN120 2OPBOX Guide...