Manual Watering; M-Manual; Programs - Toro OSMAC G3 User Manual

Manual Watering

M-Manual - Manually start a station or stations manually and specify a runtime.
What's Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Settings
Step 1 – While at the Home display, press Select
Step 2 – Press DOWN
Step 3 – Press DOWN
Step 4 – Use the UP and DOWN
and RIGHT
the desired runtime for that station.
If sequential stations will be running the same amount of runtimes, you can easily accomplish this by
setting the first station in the sequence followed by the last station in the sequence and setting the
runtimes that each station will run.
Step 5 – Repeat Step 4 for additional station or group of stations.
Step 6 – Once all the stations you want to activate are set, press DOWN
Select
to activate.
SELECT SELECT
Programs - Manually start a scheduled program before the set start time.
What's Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Settings
Step 1 – While at the Home display, press Select
Step 2 – Press DOWN
Step 3 – Press DOWN
Step 4 – Use the UP and DOWN
and press Select
Step 5 – Press DOWN
STOP Watering
START M-Manual
START Programs
START Syringes
until Manual Watering is selected and press Select
until START M-Manual is selected and press Select
arrows to select the station you want to activate, then use the LEFT
arrows to navigate to the runtime. Use the UP and DOWN
STOP Watering
START M-Manual
START Programs
START Syringes
until Manual Watering is selected and press Select
until START Programs is selected and press Select
arrows to select the scheduled program number you want to activate
.
SELECT
SELECT
until START is selected and press Select
Manual : M-Manual
Sta#: 01-01 10 min 01
Simult : 05
START
to access the controller menu.
SELECT SELECT
Manual : Start Prog
Program: 01 01
START
to access the controller menu.
SELECT SELECT
SELECT SELECT
14
.
SELECT
SELECT
.
SELECT SELECT
until START is selected and press
.
SELECT
SELECT
.
SELECT
SELECT
to activate.
arrows to set