Related Manuals for Philips ColorReach Compact Powercore
Summary of Contents for Philips ColorReach Compact Powercore
- Page 1 ColorReach Compact Powercore Premium long-throw compact exterior LED floodlight with intelligent color light...
- Page 2 Premium long-throw compact exterior LED floodlight with intelligent color light ColorReach Compact Powercore combines all the benefits of LED-based lighting and control in a compact fixture specifically designed for large-scale installations, such as commercial skyscrapers, casinos, bridges, piers, public monuments, and themed attractions. With levels of light output and projection never before achieved in a compact LED lighting fixture, ColorReach Compact Powercore delivers intense, energy-efficient output at a reasonable price, opening up new possibilities for exterior illumination.
- Page 3 Photometrics / ColorReach Compact Powercore Photometric data is based on test results from an independent NIST traceable testing lab. IES data is available at www.philipscolorkinetics.com/support/ies. 5º (no spread lens) 8º spread lens 13º spread lens 8º 5º 13º Lumens Efficacy...
- Page 4 60 - 90 131.0 3.3 % 60 - 90 81.6 2.0 % 60 - 90 93.2 2.3 % 0 - 90 4008.6 100.0 % 0 - 90 4028.1 100.0 % 0 - 90 4063.1 100.0 % ColorReach Compact Powercore Product Guide...
- Page 5 98 93 90 88 93 90 88 92 90 88 91 89 88 Zonal Lumen Zone Lumens % Fixture 0 - 60 4008.1 98.1 % 60 - 90 75.8 1.9 % 0 - 90 4083.9 100.0 % ColorReach Compact Powercore Product Guide...
- Page 6 Power Consumption 135 W Interface Data Enabler Pro (DMX / Ethernet) 13º 23º Philips Color Kinetics full range of controllers, including Light Control Control System System Manager, iPlayer 3, and ColorDial Pro, or third-party controllers Dimensions 8.5 x 28.9 x 7.7 in (217 x 733 x 196 mm)
- Page 7 Power Consumption 130 W Interface Data Enabler Pro (DMX / Ethernet) 13º 23º Philips Color Kinetics full range of controllers, including Light Control Control System System Manager, iPlayer 3, and ColorDial Pro, or third-party controllers Dimensions 8.5 x 28.9 x 7.7 in (217 x 733 x 196 mm)
- Page 8 • Any Philips Color Kinetics controller, including Light System Manager, iPlayer 3, and ColorDial Pro, or a third-party controller. Custom Configurations • One 1.8 m (6 ft) leader cable to connect each ColorReach Compact Powercore In addition to the standard configurations listed fixture to a junction box or Data Enabler Pro.
-
Page 9: Prepare For The Installation
(DMX) or IP address (Ethernet) and location of each Data Enabler Pro.. ColorReach Compact Powercore fixtures can be installed in series or in parallel (wired to a common junction box). The maximum number of fixtures each Data Enabler Pro can support depends on specific configuration details such as fixture spacing, circuit size, line voltage, and method of connection (in series or in parallel). - Page 10 (.5 in) 4X (1.05 in) If mounting ColorReach Compact Powercore on a lighting pole, make sure the pole can both support the total weight of the fixtures and withstand the maximum velocity winds to which it will be subjected. Each fixture weighs 51 lb (23 kg), and...
- Page 11 Reach Spread Lens Kit Installation Instructions for details on sealing the spread the glass, as any moisture will compromise the effectiveness of the spread lens. lens and bezel to prohibit water ingress. ColorReach Compact Powercore Product Guide...
- Page 12 6. With a standard #2 Phillips screwdriver, attach the bezel to the fixture housing using the screws provided. To ensure a watertight seal, tighten the screws to approximately 20 – 30 in-lbs (2.2 – 3.4 Nm) in the sequence shown below. ColorReach Compact Powercore Product Guide...
- Page 13 Position and Mount Fixtures Leader Cable connector dimensions 1. Position each ColorReach Compact Powercore fixture in its designated mounting location. Make sure the mounting area is clear of debris and other obstructions. UL / cUL 100-277 V 3.2 in 2. Loosen the locking bolts, using a 28 mm hex or adjustable wrench, and rotate the (81.3 mm)
- Page 14 3. If necessary, remove the connector cap from the port on the back of the ColorReach Compact Powercore housing. Insert the leader cable into the port. Turn the leader cable’s lock nut to the right until it locks into place.
- Page 15 Address the Fixtures Make sure the power is ON before addressing and configuring fixtures. ColorReach Compact Powercore fixtures operate in 8-bit mode by default. You can configure ColorReach Compact Powercore to operate in 16-bit mode, which increases fixture resolution for smoother dimming.
- Page 16 DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore Burlington, Massachusetts 01803 USA are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in Tel 888.385.5742 the United States and / or other countries. All other brand or product names are trademarks Tel 617.423.9999...