APPLIANCE TO RAIN OR MOISTURE. Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technol- ogy. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
FCC Information User Instructions The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD The Federal Communications Commission Radio America QA Lab of Samsung Frequency Interference Statement includes the fol- 3351 Michelson Drive, Suite #290, lowing warning: Irvine, CA 92612, U.S.A...
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use,as well as other burned-in images,is not covered by your Samsung limited warranty. User Instructions...
Your New Plasma Display Panel Front Panel • SOURCE button Press to display all of the available video sources (ie., Video, S-Video, Component1, Component2, PC ). • MENU button Displays the main on-screen menu. • VOL(+,-) button Press to increase or decrease the volume. Also used to adjust items on the on-screen menu.
” Aspect button Press to change the screen size. ’ Mode button Selects a target device to be controlled by the samsung remote control (ie., VCR, Cable, or DVD players). ˝ Clock Display button Press to display clock on the PDP screen.
Installing a rack on the PDP Install the rack on the swivel stand using screws. Fasten the cover of the rack using screws as shown in figure. Use the screws to fix the groove of the stand pole and the groove on top of the rack. After installing the PDP on the stand pole, fasten the bottom using screws.
Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off Press the Power button on the remote control. The PDP will be turned on and you will be ready to use it’s features. You can also use the Power button on the front of the PDP.
Connecting Speakers Speaker Audio Cable How to Connect Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. •...
Connecting a DVD/Set-Top Box Power Plug Video (Y, P ) Cable Audio Cable How to Connect Connect a Video cable between the DVD/Set-Top Box (Y,P Top Box and the Component1/2 Video Input (Y,P ) Input jacks on the PDP. • You can attach the (supplied) to the both jacks of the Video cable.
Customizing the Picture You can use the on-screen menus to change the Brightness, Contrast, Sharpness, Color, and Tint settings of your PDP. Press the Menu button, then press the joystick to enter. Move the joystick left or right to select the “Custom”. You will also see the items “Contrast”, “Brightness”, “Sharpness”, “Color”...
Viewing the Picture-in-Picture Selecting the PIP Screen Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter. Quick way to access the PIP: Just press “PIP” on the remote control. Move the joystick left or right to select the “On”.
Changing the Location of the PIP Image Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter. Quick way to access the PIP location: Just press “Locate” on the remote control. Move the joystick up or down to select the “Locate”.
Freezing the Picture Still Press the Still button on the remote control to freeze a mov- ing picture into a still one. Press again to cancel. Sound Control Customizing the Sound ...32 Using Automatic Sound Settings ...33 Using the Surround ...34...
Customizing the Sound Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. Move the joystick left or right to select the “Custom”. You will also see the items “Treble”, “Bass”, “Balance”...
Using the Surround Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. Move the joystick up or down to select the “Surround”, then move the joystick left or right to select the “Concert”, “Hall”...
Setting the Clock This PDP has a built-in clock that will appear on screen when you press the Clock Display button on the remote control. Setting this clock also allows you to use it to automatically turn the PDP On or Off. Press the Menu button.
Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’s clock, as described previously. Setting the On/Off Timer Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter.
Connecting PC and Operation Connecting to a PC ...42 Adjusting the PC Screen ...46 Changing the Position of the Image ...47 Changing the Size of the Image ...48 Enlarge of the Image (Zoom)...49 Move Expanded Picture ...50 Picture Quality Adjustment ...51 Information ...54 Power Saver (PC mode only)...55...
Connecting to a PC This PDP set is not compatible with Macintosh PC. Power Plug PC (15pin) Audio Cable Cable Cable Connecting a PC to the PDP Connect a PC (15pin) or BNC cable between the Video Output jack on the PC and the RGB1 (15p D-SUB) or RGB2 on the PDP.
Page 23
PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer. On the windows screen, select in the following sequence : Start ➝...
Adjusting the PC Screen Adjusting the R.G.B Preset: • Press the RGB button to select the PC mode. Press the Menu button, then press the joystick to enter. Move the joystick up or down to select the “Color Control”, then move the joystick left or right to enter. Move the joystick up or down to select the item you want to change.
Changing the Size of the Image Preset: • Press the RGB button to select the PC mode. Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Quick way to access the Size: Just press “Scaling”...
Move Expanded Picture Preset: • Press the RGB button to select the PC mode. Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Quick way to access the Zoom: Just press “Zoom/Pan”...
Page 27
Frequency Adjustment Preset: • Press the RGB button to select the PC mode. Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter.
Information Preset: • Press the RGB button to select the PC mode. Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Move the joystick up or down to select the “Miscel- laneous”, then move the joystick left or right to enter.
Selecting a Menu Language Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter. Move the joystick left or right to select the appropri- ate language: English, Spanish, or French. Press the Menu button to exit.
Using the Key Lock When setting Key Lock ON, the buttons (SOURCE, MENU, VOLUME, SELECT, MUTE, POWER) on the front of the PDP don’t operate. But those buttons will operate when setting Key Lock OFF. Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. Problem Possible Solution Poor picture. Check all wire connections. The power indicator is amber The monitor is using its power management system. blinking.
Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been accepted as a device with proper electrowave and you can use this PDP not only in a residential area but other areas.